Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
I need to change my discs but the callipers are done up with T50 torx bolts which are dead tight on the rear disc the bottom bolt has the bracket for the handbrake in the way can this be removed? and any more advice on how to get these bolts undone would be gratefully received

Thank you
 

·
Registered
Joined
·
5,906 Posts
I use a torx bit which can be attached to a 1/2" square drive socket bar. You need a decent make, not a cheap one that is made of papier mache. Give the bolts a decent soaking with plusgas / wd40 and leave to soak for a while. They are extremely tight so you'll need a bar with good leverage.
 
1 - 3 of 3 Posts
Top