Peugeot Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
hi all

can any one help

i have a 307cc 1.6 16v 2005 55 plate

it keeps puting up mill light ,p0341 and sometime depolution fault (not allways )
car runs fine starts fine etc

have changed pre cat lambda
crank sensor
still no jot driving me mad i know that p0341 says cam sensor but acording to pug there is no cam sensor on a 1.6 petrol

any help would be really good thanks in advance

cath :mad:
 

·
Registered
Joined
·
190 Posts
Is it an old fault at all? On my 307cc it showed the same fault but there was nothing wrong with the cam sensor at all.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
thanks for the reply i have cleared this 3 times now but still pops back up !!!

is yours a 1.6 do you have a cam sensor peugeot tell me they only exsisit on the 2.0
 

·
Registered
Joined
·
586 Posts
I suspect that you need to check you cambelt timing first to see if all is well. Then check all the spark plugs are okay. This should be a NFU engine which P0341 means ignition phasing coherence which means its probably the coil pack that is shot but best check the other two first.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #9
update

changed coil pack today
cleared fault code with pp
all seems to be fine no depolution fault no mill light thanks to everyone who replied

{coil on my car was a sagem know for playing up aparently}:lol:
 
1 - 9 of 9 Posts
Top