Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Hey,
I need to but a new front wing for the passenger side, Mine is a 3 door car.. and i'm not too sure if a 5 door car will have the same size wing as a 3 door car?
anybody know if they'll be the same size?
Thanks :) x
 
C

·
Guest
Joined
·
0 Posts
I'm 99% sure they're the same, provided the wing is from the same model phase.
 
S

·
Guest
Joined
·
0 Posts
They will be the same front wing

You just have to make sure the "donor" wing is from the same phase

There were 2 facelifts in the lifetime of the 306, they werent massively different but you might find indicators not fitting properly if you get one from a different phase

If you stick to a donor car of roughly the same age you should be ok :thumb:
 

·
Registered
Joined
·
34 Posts
Ok. 306 3 or 5 door are the same.
from nose to center of the wheel it is 815mm
from center of the front wheel to the center of the rear wheel it is 2580mm.
from center of the rear wheel to the back it is 635mm.
the total lenght from nose to back is 4030mm.

they only look different due to the missing / added door.

hope that helps
 
1 - 4 of 4 Posts
Top