Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Is it possible to put a front mount inter cooler on a 306 1.9 td is it a case of unbolting my top mount and running pipes to the front
 

·
Registered
Joined
·
91 Posts
yea good mod to do

first locate a inlet manifold from an xzara that had a from mount as the 306 has a top mount and some xrara do as well

then pipework from the inlet bring the pipe across the top of the engine towards the radiator down the side of the airbox,
then across towards the passenger side of car behind the wheel arch and round to front of car into were u will fit intercooler

from intercooler run the pipework throught beside rad bit of cutting required and up to the pipe beside timing cover.

somewere along there u need to get a peice of pipe put on the intercooler hose to run to the boost pipe on the fuel pump and to maybe put a boost
gauge in to c wat pressure you are running
 
1 - 4 of 4 Posts
Top