Peugeot Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Hi, Can anyone tell me if a 2000, X reg. 306 HDi diesal tank is plastic or metal as I have a leak and need to know what kind of repair kit to buy. Thanks in advance :lol::thumb:
 

·
Registered
Joined
·
901 Posts
Its plastic,Peugeot havnt fitted metal tanks since the early 80`s.
Its highly unlikely its the actual tank leaking,unless its had a big impact with a rock or whatever.A common leak on 306`s is the small hose that connects the fuel filler neck to the tank splits.Other leaks could be the gaskets around the intank fuel pump.Take out the rear seat cushion and the large plastic grommet in the floor to see if there is any fuel on top of the tank.
 

·
Registered
Joined
·
16 Posts
Discussion Starter #5
Thank's

Cheers Guys, I can now get the correct repair cement, it is defanetly a tank leak as I went over a high sleeping copper and it bent the exhaust heat shield, when I tried to straiten it out it must have gone into the tank, not a bad leak but don't want diesel all over. Cheers again :thumb::thumb:
 
1 - 5 of 5 Posts
Top