Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Another to watch out for (job I need to tackle soon) there is a short length of exhaust that drops down from the turbo, mine has a crack almost all the way round, just below the original weld, I'll take it off re-weld & reinforce, this will be a fairly common fault which I believe should be addressed by a recall.
 

·
Registered
Joined
·
14 Posts
Discussion Starter #2
Another to watch out for (job I need to tackle soon) there is a short length of exhaust that drops down from the turbo, mine has a crack almost all the way round, just below the original weld, I'll take it off re-weld & reinforce, this will be a fairly common fault which I believe should be addressed by a recall.
Tackled this today, the s shaped pipe from the turbo to the cat had cracked all the way round, now welded & reinforced with a piece of stainless. This pipe has a smallish bracket supporting it which is totally inadequate (or the cat was originally poorly fitted) hopefully OK for another 50k miles.
 
1 - 2 of 2 Posts
Top