Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter #1 (Edited)
Hi, the center rear of the sump gaurd is getting oil on it and it's comming up high from behind the motor.
I'm wondering if there is a common oil leak problem from behind and up high on this motor 2006 2.0lt HDI 136.
As I removed the sump guard looked from underneath and it's so tight a congested in there you cannot see anything even with a torch, and from the top nothing is seen either. And I don't think it's the rocker cover, could it be a turbo oil return pipe, do they give leak problems on this car as they seem to be a good flange type of fit from diagrams I've seen.
I may get one of those flexable 1mt Enoscope cameras with LED that usb connect up to your laptop, couldn't belive how cheap they are $20 ebay

Cheers George
 

·
Registered
Joined
·
14,276 Posts
Rocker cover, cam upper case cover, cam end seal, fuel pump mount on head, breather pipe from rocker cover to air intake turbo feed/return pipes lots of places !!!
 
1 - 2 of 2 Posts
Top