Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
I am in the process of kitting my van out to start using in our business. Today I decided to replace the rear interior light with led strip lights. The rear light has never worked since buying the van so I removed the light unit and tested the wires. For some reason there is no power getting to the rear light. I have checked the fuse which is I think fuse 6 and that is fine. The cabin light works so I'm wondering if it's best to branch off that to fit a rear light. Anyone had an issue with the rear light and if anyone has any tips for adding additional light to the rear, any info would be much appreciated.
 

·
Registered
Joined
·
11 Posts
Discussion Starter #2
All fuses are fine. For some reason the live wire to the rear light is dead. I was going to branch off another live but if I do that the light may not operate when opening and closing the doors. I'm starting to think battery operated lights would be less hassle.
 
1 - 2 of 2 Posts
Top