Peugeot Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello Everybody,

I got the follwing problem from my beloved Coupé,

if it shifts from 5 to 6 at the speed 130km/h (or over), it falres for for about 2 sec and it shows PRND on the console.
Fault code P0741 : Torque Converter Clutch Circuit Performance or Stuck Off

Beside of this it changes the gears smoothly, no problem on other levels, nor shift from 5 to 6 at lower speed.


Is it a problem of the gearbox or could it be something else?

Any suggestion what should I check? What i've done so far is the chack of the airflow meters,cleaned it, however it did not help at all.

Thank you in advance,

Incubus
 

· Registered
Joined
·
1,144 Posts
Probably has a fault with the valve body in the gearbox. It is a well documented fault with this box. Google faults with AM6 gearbox..

A full flush/oil change might help [it did with mine] but not always. Probably is only a short term solution anyway. :(
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top