Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Looking for some advice quite urgently.

Sheared a wheel bolt in the hub.

Looking to get a new hub assembly to swap over as its easier than drilling it out.

Can anyone shed any light / tips on the best route to take?

Do i need new ball joints ( how many )?

Thanks
 

·
Registered
Joined
·
1,045 Posts
if it was me, i would try and drill it out that means your not going to be out for a new brake disc, if you want to remove the hub then you need to remove the calber, drop link, and ball joint, also your shock needs to be pulled apart from the hub thats just two bolts, next would be your drive shaft and i think its 36mm shocket you need also remove the abs sensor! and swap the new one over and rebuild it back up, should take you around 30-45mins if your handy with working on cars:thumb:
 
1 - 2 of 2 Posts
Top