Peugeot Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
206 2.0 Manifold Problems

My 206 2 litre version has developed a rattle noise in the manifold on accelleration reaching about 2000 revs, I was going to replace my manifold but ive been told that all the manifolds on the 2 litres have this problem, so if I replaced my manifold it will happen again about 6000 to 10000 miles down the line. Has anyone else had this problem or have any tips on how to remedy this problem. Thanks

:confused:
 

·
Registered
Joined
·
5 Posts
Manifold

Hi.
I was informed that they improved the manifold from the first quarter of 2003 or 2004. So if you change it for a new one, it should work better.
However it's a lot of work so you could as well put a custom one that gives a little more HP and gain something from all the trouble.
It is probably also possible to weld the old one and use it again, it depends.
 

·
Registered
Joined
·
5 Posts
I think that 4-1 is best but the main thing is that all the tubes must have the same length from engine to junction.
 
1 - 6 of 6 Posts
Top