Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
good evening,

on my 2002 peugeot 106 1.1 independence, i have a new fault....

the screen washer wasnt working, and was found to be a pump that was faulty, (the pump mechanism was jammed, when removed the motor span in the relevant directions.)

so i replaced the pump with a new one, everything worked fine. came back to the car after bleeding the breaks (just overhauled them.) and now the front washer doesnt work. the rear wiper and washer work and the front wipers work but not washers.

i have checked the plug and there is no voltage getting to the motor when it switched to turn the front washer on. i have looked at the haynes manual, and I cant understand where some of the relays are on the car which are mentioned in the diagram, i suspect that these may be the culprit.

Does anyone have any advice ? or information to help me?

Thanks for your time and help,

Ben
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
I forgot to add, I removed the stalk and and used s buzzer on the pins, they all seemed to work okay, I don't know for sure what pin does what but at lest 1 pin changed state every time I changed a function.
 
1 - 3 of 3 Posts
Top