Peugeot Forums banner

1 - 20 of 40 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter #1
Hi all
Does anyone know if you can clone a transponder key with Planet?
I have PP200 and want to programme a new key when I get one but was wondering if I need the code or I could do it with Planet.
Also is there a guide to programming a key using Planet anywhere or is there someone on here that has done it?
Thanks in advance
Andy
 

·
Registered
Joined
·
4,779 Posts
you can not clone with planet you need the code to program also if its a non remote key then it might be cheaper from dealers as you can get it all ready cut so no need to pay for cutting then, if its a remote key you could just get the blade from dealers all ready cut
 

·
Registered
Joined
·
48 Posts
Discussion Starter #3
Thanks Trustme,
I was going to buy a blank from Ebay with a chip and get it cut. It looks as if I'll have to get a code from Betty and then code that to the new key. I've not done this with Planet and was wondering if anyone knew how to do it. There is a Youtube video of someone doing it on a 307 so I guess its the same procedure?
Thanks
Andy
 

·
Registered
Joined
·
48 Posts
Discussion Starter #9

·
Registered
Joined
·
4,779 Posts
i dont supply keys as there is not very much in it unless i am programming and cutting it too, some remote keys i will supply because i can make a bit
 

·
Registered
Joined
·
25 Posts
Your 106 2001 year, have ID46 transponder, You can Program new with PP2000 if you have key CODE , If not you have to clon it on more expensive transponder with jma TRS 5000 evo, or someone who have this cloner.
 

·
Registered
Joined
·
1,424 Posts
you said get key then code :) it is a four digit code which you need first that is what the key is cut too...I believe
If you have planet Programming a new Key is not difficult
 

·
Registered
Joined
·
4,779 Posts
you said get key then code :) it is a four digit code which you need first that is what the key is cut too...I believe
If you have planet Programming a new Key is not difficult
when you go to dealers to get the code you get two codes

a blade number to cut the key to (but if you have a key it can be copied from this) or if you have a lishi lock reader you can get the cut from the lock once you have picked it

and a four digit code that is to program the transponder to you car (this can be extracted on some cars vi obd using specialist equpiment and others from a chip on bsi or ecu)
 

·
Registered
Joined
·
1,424 Posts
when you go to dealers to get the code you get two codes

a blade number to cut the key to (but if you have a key it can be copied from this) or if you have a lishi lock reader you can get the cut from the lock once you have picked it

and a four digit code that is to program the transponder to you car (this can be extracted on some cars vi obd using specialist equpiment and others from a chip on bsi or ecu)
Long time since I programmed my key I had no codes whatsoever but Betty helped me out via text message with that
Sometimes I have to retrace my steps to remember what I was doing 3 minutes ago :confused:
 

·
Registered
Joined
·
48 Posts
Discussion Starter #18
Thanks Guys
So, let me get this straight.
1. I buy a blank virgin ID46 key
2. Get code from Betty or whoever
3. Get new key cut from the old key template
4. Code new key to car using Planet and code

Is that the sequence I need to follow?

Thanks
Andy
 

·
Registered
Joined
·
25 Posts
Thanks Guys
So, let me get this straight.
1. I buy a blank virgin ID46 key
2. Get code from Betty or whoever
3. Get new key cut from the old key template
4. Code new key to car using Planet and code

Is that the sequence I need to follow?

Thanks
Andy
Yes
:thumb:
 

·
Registered
Joined
·
1,424 Posts
the link to the Key place needs a code they cut the Key and send it with a virgin id chip

the code lets them Know what the key cut is I believe
 
1 - 20 of 40 Posts
Top