Search Results for ‘wiring’

My Peugeot 206 1.4 petrol 2009 model is cranking but it wont start so i want to check if the current is reaching the fuel pump or not. I want to check it by using a bulb. Is it correct? What is the positive and negative side? Could you please help me?

Hi guys! I want to remove the trunk door on the car and I am wondering how to unplug the wires for electrics and windshield fluid? The wires just continue from door and inside the car. Do I need to take off the roof to unplug it or am I missing something? I have wires in the other door, that I...

Hi! As you can see from the title: Can i use the steeringwheel-controls without an adapter on my Pioneer, and if so, which wires do i have to solder into the 3,5mm jack? (I'm sorry if the grammar isn't too good. English aint my mother tongue 🤷‍♂️ ) In advance, thanks for the help :)

Hi, I am having a bit of trouble with break lights on my 2018 boxer. Its showing a warning to check lights but everything seems to be working (Bulbs, fuses and relays). It has 2 halogen bulbs and 1 led 3rd light. When you unplug 1 bulb they work fine. if all are plugged in the lights turn off...

I'm in the process of overhauling an old 2000 1.1i (independence, TU1JP) 106, and I have noticed that the suppressor capacitor from the coil is broken and not attached to anything (the metal tab has been wrenched off inside the suppressor housing and I found it lying on top of the gearbox). That...

Heya everyone, We have a problem with the heater in our 2006 Peugeot 107! Simply put, it doesn't work at all. Turning the knob does nothing on every setting, be it speed, temperature, or functionality. Bearing this in mind, we tried a series of fixes to see if we could solve the issue. That...

I'm trying to replace The rear barn doors on my Citreon Disptach with a tailgate from an Expert taxi e7. I have a couple of questions: Firstly, getting the wiring to work. Below are attached wiring diagrams from dispatch and expert tepee. Dispatch 6218 plug is: pin 1: G/Y wire ground...

Hi All, I'm wanting to fit a reversing camera and need to wire it to the reverse light and the negative (i think) of the wiring harness that's located inside the top of the boot door. Does anyone know which wires these would be to save exposing all of them for a bit of trial and error, or maybe...