Peugeot Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Expert
    Hi all. I don't think this is specific to my van so hopefully OK in here. Full service including Fuel Filter. 175,000 miles but owned by Euro Car Parts I'm led to believe. Turbo and EGR less than 10k ago. Main symptoms to go by: Jerking at low revs. rough rrrRRrrrrRRrrrRRrrrrRR Idle Flat...
  2. 208 (2012-2019)
    I have a Peugeot 208 1.0 2013. Theres a code that keeps coming up, p1336. I have changed the spark plugs twice and replaced all coils and the issue is still there. I've been told the timing belt needs changing but also been told that would not cause misfire issues as its not related to...
  3. 3008 (2016 & prior)
    managed to get my Peugeot started after changing the bsm in the engine bay, but once the engine gets up to temperature it’s miss firing and really juddering and revving up and down on its own but only when it gets hot ! I’ve plugged it into diagnostics and this is what I’ve got any help would be...
  4. 208 (2012-2019)
    Hi all does anybody have any ideas? I have a 1.4 vti petrol peugeot 208. When idling for about 1 minute or 2 the engine management light flashes the engine runs on 3 cylinders and the colling fan kicks in. Fault code p1337 Witch I have researched as a cylinder 1 misfire. When driving the car...
  5. Introductions
    My boxer with 3.0 litre iveco engine 23000 miles, has this problem where it revs up 3 times in sequence when I pull up at junctions. No fault codes and it's had Rail pressure sensor, tank pump, filter housing, vacuum selanoids , waste gate freed off, high pressure pump and pressure regulator...
  6. 308 (2007-2014)
    Would the fuel pressure regulator causing a slight misfire under gentle acceleration between 1500 and 2000 rpm? Also has poor starting and seems almost to miss when starting. Thanks everyone in advance.
  7. 207
    hello everyone , just bought a Peugeot 207 1.4 petrol with problems: engine is shaking, and now recently engine doesn’t start up. If anyone could help me this will be appreciate, thank you !
  8. 307
    Hello guys, Any advice or knowledge will be greatly appreciated. I have a 2004 307cc 2.0 16v petrol. Had loads of trouble but now the persistent problem now seems to be: On start up the car displays catalytic converter fault and antipolution. Took it to a garage for diagnostics and the only...
1-8 of 8 Results
Top