Can anyone help me find the correct replacement starter motor? - Peugeot Forums
Peugeot Forums - Peueot - Citroen Community
Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise


Go Back   Peugeot Forums > Peugeot Models > Vans > Partner
PeugeotForums.com is the premier Peugeot All Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 02-02-18, 02:44 PM   #1
Junior Member
 
Join Date: Feb 2018
Posts: 7
Default Can anyone help me find the correct replacement starter motor?

Hello all,

I've a 2005 Peugeot Partner (Escapade) 2.0 HDI.

Really struggling to turn over, currently using a jumper battery to get it going.

Have been working through the probable causes with a mechanic - tried another battery, checked all the starter wiring and connections.

Now at a point where we're going to replace the starter motor.

Came across the following post on a Berlingo forum, could be what I'm experiencing:

Quote:
I now know what the problem is and my Blingo is in full working order again.

Due to emissions requirements, the "far too clever for its own good" ECU does not deliver fuel to the injectors until the cranking speed reaches a certain value. In my case it turned out that it was the battery which had dropped enough performance in the cold to stop the critical speed being reached, new battery sorted it for me. The other common cause is a tired starter motor which triggers the same problem and Polar must have had this issue.

Citroen do a cold climate starter motor which is geared differently and spins the motor faster, a dealer tweak for cars having problems is to fit one of these apparently. Doesn't seem to be necessary if your battery and starter are up to scratch however.

I have spent a fortune and hours on this problem, I hope I can save someone else from doing the same.
Does anyone know the what the right starter is for my model? EuroCarParts etc, can't help me here. They throw up a number of starters with different teeth.

A photo of the gubbins if this helps - I can dig out the vin too.



Any thoughts or help greatly appreciated!
moosemaster is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 02-02-18, 06:04 PM   #2
Senior Member
 
Join Date: Oct 2012
Location: falkirk
Posts: 14,026
Default

Get a 1.7 kw starter for any 2 litre HDI your original is 1.4 i have never really understood why so many variants are listed as they all fit !!
__________________
assume nothing check everything twice !!
reliable406 is offline   Reply With Quote Quick reply to this message
Old 02-02-18, 06:22 PM   #3
Junior Member
 
Join Date: Feb 2018
Posts: 7
Default

Quote:
Originally Posted by reliable406 View Post
Get a 1.7 kw starter for any 2 litre HDI your original is 1.4 i have never really understood why so many variants are listed as they all fit !!
Ta!

The variants listed have different lengths, teeth numbers, flange sizes - but they'll all fit aye?

Just double checking before I click through the checkout...
moosemaster is offline   Reply With Quote Quick reply to this message
 
Old 02-02-18, 06:28 PM   #4
Senior Member
 
Join Date: Oct 2012
Location: falkirk
Posts: 14,026
Default

I have swapped literally hundreds of starters on 2 litres and ALL have fitted ALL cars/vans

Only difference i have ever seen was on autos they can sometimes be longer.
__________________
assume nothing check everything twice !!
reliable406 is offline   Reply With Quote Quick reply to this message
Old 02-02-18, 07:04 PM   #5
Junior Member
 
Join Date: Feb 2018
Posts: 7
Default

Quote:
Originally Posted by reliable406 View Post
I have swapped literally hundreds of starters on 2 litres and ALL have fitted ALL cars/vans

Only difference i have ever seen was on autos they can sometimes be longer.
Grand, I shall get it ordered!
moosemaster is offline   Reply With Quote Quick reply to this message
Old 08-02-18, 02:45 PM   #6
Junior Member
 
Join Date: Feb 2018
Posts: 7
Default

Starter turned up, went in to get it swapped...

Mechanic said it's a no go - the one ordered has 11 teeth, the one fitted 10.

Back to the drawing board!

Anyone know of a 1.7 starter with 11 teeth?



moosemaster is offline   Reply With Quote Quick reply to this message
Old 08-02-18, 02:49 PM   #7
Senior Member
 
Join Date: Jul 2014
Location: Jersey CI
Posts: 2,394
Default

If you quote the last eight digits of the VIN, I can look up the Peugeot Part No.
IanML is online now   Reply With Quote Quick reply to this message
Old 08-02-18, 02:57 PM   #8
Junior Member
 
Join Date: Feb 2018
Posts: 7
Default

Quote:
Originally Posted by IanML View Post
If you quote the last eight digits of the VIN, I can look up the Peugeot Part No.
9517 3532

Cheers!
moosemaster is offline   Reply With Quote Quick reply to this message
Old 08-02-18, 05:26 PM   #9
Senior Member
 
Join Date: Oct 2012
Location: falkirk
Posts: 14,026
Default

I never even count the teeth never had an issue just try it you may be surprised

Peugeots part number wont tell you how many teeth the pinions have i have swapped starters between berlingos experts 406s 807s 206s 307s c8s etc etc they ALL swap !
__________________
assume nothing check everything twice !!
reliable406 is offline   Reply With Quote Quick reply to this message
Old 08-02-18, 06:20 PM   #10
Junior Member
 
Join Date: Feb 2018
Posts: 7
Default

Quote:
Originally Posted by reliable406 View Post
I never even count the teeth never had an issue just try it you may be surprised

Peugeots part number wont tell you how many teeth the pinions have i have swapped starters between berlingos experts 406s 807s 206s 307s c8s etc etc they ALL swap !
Ach, well now! I've just paid my mechanic to take the starter out only to say he wouldn't fit this one as there could be negative consequences...

I don't not believe you - but is there any information you could refer me to be confirm the cross-compatibility of these starters?

Last edited by moosemaster; 08-02-18 at 06:21 PM. Reason: typo
moosemaster is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Peugeot Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 09:01 PM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.