Urgent advice please - Peugeot Forums
Peugeot Forums - Peueot - Citroen Community
Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise


Go Back   Peugeot Forums > Peugeot Tuning & Modifications > Maintenance
PeugeotForums.com is the premier Peugeot All Forum on the internet. Registered Users do not see the above ads.
Like Tree2Likes
  • 2 Post By waynebrown

Reply
 
LinkBack Thread Tools Display Modes
Old 30-03-14, 06:10 PM   #1
Senior Member
 
Join Date: Nov 2012
Location: London
Posts: 114
Default Urgent advice please

Hi, just servicing my 2.7 hdi 407 (coupe), drained the oil and changed the filter, no problems, however, the sealing sump washer supplied by the main dealer is different to the one on the car, which I expect is the original.

The one on the car is a silver solid washer with what looks like a rubber O ring seal against the tread. The supplied one is the standard hollow compression copper type. Any thoughts/advice?

The second question is what are the torque values for the plastic filter canister, and the sump drain bolt?? This is an early 2009 model.

Would like to finish this job off tonight, so thinking of re fitting the original sump washer, and leaving the canister at about 5Nm.

Regards Ian
IanB is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 30-03-14, 09:12 PM   #2
Senior Member
 
Join Date: Jul 2013
Location: Huddersfield, West Yorkshire
Posts: 496
Default

407 COUPE 2 DOORS 2.7 HDi particle emission filter


(19) Oil filter cover Tightening torque to 2,3 da.Nm
(20) Oil filter support Tightening torque to 0,9 da.Nm
(21) coolant/oil heat exchanger Tightening torque to 0,9 da.Nm
(22) Oil pressure switch Tightening torque to 1,3 da.Nm
(23) Oil pump assembly Tightening torque to 0,9 da.Nm
(24) dipstick Tightening torque to 2,3 da.Nm
(25) Oil level sensor Tightening torque to 2,7 da.Nm
(26) sump Tightening torque to 0,9 da.Nm
(27) drain plug Tightening torque to 2,3 da.Nm
(28) Oil suction strainer Tightening torque to 0,9 da.Nm
(29) Piston skirt spray jets Tightening torque to 1 da.Nm
(30) Turbocharger lubricating pipe Tightening torque to 0,9 da.Nm
(31) Turbocharger lubricating pipe Tightening torque to 1,3 da.Nm

Hope it helps.
IanB and frednierck like this.
__________________
Peugeot & Citroen Diags. Huddersfield.
waynebrown is offline   Reply With Quote Quick reply to this message
Old 30-03-14, 09:34 PM   #3
Senior Member
 
Join Date: Nov 2012
Location: London
Posts: 114
Default

Hi Wayne,

Thanks mate that's brilliant, I took a punt and gave them a good old fashioned tug with the socket wrench, pored the oil in and put the sump shield back on.

I recon the sump plug will be OK but I'll get the torque wrench on the canister housing ASAP,as I was more cautious with that.

Out of interest where did you get the info from?

Ian
IanB is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Peugeot Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 09:30 AM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.