Peugeot Forums banner

Panaromic Roof Cover half missing

4K views 5 replies 3 participants last post by  davidireland 
#1 ·
Hi Guys, I knew this car had this fault when I bought it and now I am looking into the cost of rectifying it.

The panoramic roof cover operates fine in as much as it goes forward and back as dictated by the rotating control switch position.

However only about 12 inches of the actual cover moves. The rest appears to be separated from the 12inches in question and is stuck within the roof :thumb:

The car is a 2005 407 2.2 SE

Can anyone advise if there is a quick fix for this or how much it would cost to get it fixed?

Many Thanks

Marv
 
G
#6 ·
Definitely a full days work. its very intricate. The headlining has come out. All the panels along the sides have to come off. The whole sliding screen mechanism has to come out. Then most likely the clips that hold the screen sections together have broken.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top