Power steering problem, please HELP! - Peugeot Forums
Peugeot Forums - Peueot - Citroen Community
Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise


Go Back   Peugeot Forums > Peugeot Models > 407
PeugeotForums.com is the premier Peugeot All Forum on the internet. Registered Users do not see the above ads.
Like Tree2Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 28-02-17, 11:53 AM   #1
Inactive User
 
Join Date: Sep 2012
Location: Southport
Posts: 49
Send a message via Skype™ to shp3r1uk
Default Power steering problem, please HELP!

Hi everyone,

I'm really going crazy now.
Having a problem with power steering, but only when turning to the left and only when driving. When car parked and engine on it works just fine. I am now away on the ship and asked my mate to top up the fluid as it leaked out, because it's foaming.

I had the same problem about a year ago, looked at the forum and people advised to top up over the maximum level and that would fix the problem. It did at the time, but now the problem is back and cannot get rid of it. Couple of years ago I also had the steering rack replaced as the seals had gone and I don't want it to happen again as it was costly!

I'm a marine engineer and I know a lot about mechanics and stuff... Is there some sort of a pressure relief valve that doesn't work/gets sticky, a blocked line, a filter within the pump unit?

The car gets dropped off to a garage on Thursday (separate issue) and I want to ask the guy to take a look at it, but wanted to know if anybody here can help beforehand.

Any idea please?

Regards,
Thomas
shp3r1uk is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 28-02-17, 12:23 PM   #2
Senior Member
 
neecola's Avatar
 
Join Date: Dec 2015
Location: Belgrade/Serbia
Posts: 208
Default

This is one thing I am getting willing to try, it makes sense to me


https://www.peugeotforums.com/forums/...tml#post101440

Quote:
Originally Posted by Andres View Post
After 1,5 months of ownership of 407 I think, that I got this issue sorted out without new pump and high pressure hoses. Just for the background Im working in the Volvo dealership and we have very close relationship with Peugeot main dealer as they are taking care all of our paint jobs as subcontractors. This also resulted a nice 407 with bargain price for me . My problem was mainly steering judder and seems like there had been a leak from reservoir cap as pump unit was covered with oily goo. After some testing I found out that power steering liquid is full of bubbles and bubbles = air. Air in steering system = judder + „boiling“ fluid. Sounds simple but how to cure it? Now the smart guys from Peugeot come in. They have seen it many times and they also have a nice and easy fix for that. You need to remove pump unit from your car and open it up from reservoir side (there are 4 allen head bolts, do not touch the torx bolts!) After getting the reservoir off you can see, that there are not much space for oil and this makes the system especially vulnerable. You also can see, that return pipe hole in reservoir body has only 2,5-3mm hole (!). So you can imagine now what happens when returning oil is pressed trough this tiny hole. To make matters worse the return hole is very close to upper oil level. Basically Peugeot engineers invented foaming machine. And this is the reason why they are recommending to add oil +30mm from MAX mark. But I can assure you, that this just a workaround and not a fix as oil still gets aerated, not so badly but still. But back to fix. Get your hands on inch plastic fuel pipe. You only need some 20-25 cm. With 6mm drill bit drill over the small return hole in reservoir body. Clean everything carefully as there are no filter in the system! Now prepare the fuel hose end. You do not want that this hose escapes to the reservoir. Find a steel ball (from ball bearing), heat it little bit and press the plastic fuel hose to on it. This creates nice flange on the hose end and this flange is acting like a stop for it. Now install the pipe to reservoir. Just insert untreated end to return hole from outside and pull it through. It can be little hard as you drilled 6mm hole and hose diameter is some 6,35mm but little action with drill bit or file should do the work. Again remember that we do not want that hose “escapes” and cleanliness is a must. When the pipe is in place route it so, that end of pipe stays in lowest point of fluid reservoir. If needed then cut the pipe to right length. Install the fluid reservoir back to pump unit. Fit everything back and fill the system with new fluid (Total DA only!). Then try to bleed the system. This point can be a bugger, it took me 4 days to get it air free and I had to add little oil every day (no leaks). But now it seems to be just fine. So what we just did? We moved return outlet from upper side of the tank to bottom of the tank. And what do you know – no air any more. I got this solution done under 10€ as dealer charged me only for new oil. Hope this helps someone.

BTW I had a look on my friends 508 and it has similar pump unit as 407 but return hose goes directly to bottom of the reservoir. Seems that they have learned something.
I googled for 508 steering pump



This is not confirmed fix and you can have specific issue with yours (some mentioned, repair of the pump needed, or steering rack or just replacing the hose)
No one offered any confirmed solution
shp3r1uk likes this.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
neecola is offline   Reply With Quote Quick reply to this message
Old 28-02-17, 03:30 PM   #3
Inactive User
 
Join Date: Sep 2012
Location: Southport
Posts: 49
Send a message via Skype™ to shp3r1uk
Default

Thanks a lot. I am definitely going to try that, it does make sense. I can imagine this tiny hole on the system return is clogging up (due to no filter) within time and makes it worse.

Thanks again.

regards,
Thomas
shp3r1uk is offline   Reply With Quote Quick reply to this message
 
Old 28-02-17, 05:54 PM   #4
Senior Member
 
neecola's Avatar
 
Join Date: Dec 2015
Location: Belgrade/Serbia
Posts: 208
Default

Not sure if its going to clog but i think that this is the cheapest possible fix (if we dont break anything in the process) other than making sure all clamps on the hoses are tight and no visible damage/leaks
neecola is offline   Reply With Quote Quick reply to this message
Old 02-03-17, 04:24 AM   #5
Inactive User
 
Join Date: Sep 2012
Location: Southport
Posts: 49
Send a message via Skype™ to shp3r1uk
Default

That's right.
I'm getting off the ship on Wednesday, will have a go at it Thursday and will let you know.

Thanks again.
shp3r1uk is offline   Reply With Quote Quick reply to this message
Old 02-03-17, 04:32 AM   #6
Inactive User
 
Join Date: Sep 2012
Location: Southport
Posts: 49
Send a message via Skype™ to shp3r1uk
Default

Quote:
Originally Posted by neecola View Post
Not sure if its going to clog but i think that this is the cheapest possible fix (if we dont break anything in the process) other than making sure all clamps on the hoses are tight and no visible damage/leaks
One thing I am not sure of though, this plastic pipe...
If you drill a 6mm hole and stick a plastic tube/pipe of 6 mm outside diameter, the inside diameter will be still about 3mm due to the thickness of the pipe walls. Isn't the whole idea to make this return hole larger than it is originally?
shp3r1uk is offline   Reply With Quote Quick reply to this message
Old 02-03-17, 07:32 AM   #7
Senior Member
 
neecola's Avatar
 
Join Date: Dec 2015
Location: Belgrade/Serbia
Posts: 208
Default

Well as I understood its more about changing the position of the outlet to the bottom of the reservoir, because as it is now it is to close to the upper oil level (and it mixes the air with fluid much more than it would if it exit hose was submerged)
storeman likes this.
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
neecola is offline   Reply With Quote Quick reply to this message
Old 02-03-17, 11:58 AM   #8
Inactive User
 
Join Date: Sep 2012
Location: Southport
Posts: 49
Send a message via Skype™ to shp3r1uk
Default

Yes I agree, but I also think that the size of the hole will determine the speed of the fluid passing through it (basic fluid dynamics), the larger the hole, the lesser the velocity. I will just order 2 different sizes and see how it goes.

Thanks
shp3r1uk is offline   Reply With Quote Quick reply to this message
Old 11-03-17, 08:59 PM   #9
Inactive User
 
Join Date: Sep 2012
Location: Southport
Posts: 49
Send a message via Skype™ to shp3r1uk
Default

Hi there,

Can someone tell me how to add pictures from computer here, not URL? I have stripped the pump to pieces and would like to share if anybody's interested.
shp3r1uk is offline   Reply With Quote Quick reply to this message
Old 11-03-17, 11:34 PM   #10
Senior Member
 
Join Date: Dec 2016
Posts: 681
Default

Find and press the "Manage Attachments" button when replying to a post. Then In the window that pops up, press the "Choose File" Button. Navigate to the photo's select, click "Open". Finally, click "Upload" and it should be done.
BiGK is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Peugeot Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 03:48 AM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.