Fault Codes for Turbo - Peugeot Forums
Peugeot Forums - Peueot - Citroen Community
Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise


Go Back   Peugeot Forums > Peugeot Models > 407
PeugeotForums.com is the premier Peugeot All Forum on the internet. Registered Users do not see the above ads.
Like Tree3Likes
  • 1 Post By mr_rusty
  • 1 Post By fhmboy
  • 1 Post By windy1603

Reply
 
LinkBack Thread Tools Display Modes
Old 09-10-14, 07:24 PM   #1
Inactive User
 
Join Date: Aug 2014
Location: St Helens
Posts: 49
Default Fault Codes for Turbo

Just been to see Craigleather to have a diagnostic on my car . Very helpful guy by the way .
Came up with two codes
P2562 Turbo Signal Valve Position
P0299 Turbo Pressure Signal
Both said permanent faults
I,m thinking they are connected ie Turbo Pressure Solenoid isn't working which will cause the Turbo Signal Valve Position error
Can anyone shed any light on this ?
He managed to turn the fault off and the car is like a different car now as the turbo seems to do what its supposed to do .
Hopefully the fault wont reappear or its a dodgy connection as I was looking about the car today and all the pipes seem ok .
mr_rusty is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 09-10-14, 07:38 PM   #2
Senior Member
 
trustme's Avatar
 
Join Date: Jan 2013
Location: bradford
Posts: 4,777
Default

Quote:
Originally Posted by mr_rusty View Post
Just been to see Craigleather to have a diagnostic on my car . Very helpful guy by the way .
Came up with two codes
P2562 Turbo Signal Valve Position
P0299 Turbo Pressure Signal
Both said permanent faults
I,m thinking they are connected ie Turbo Pressure Solenoid isn't working which will cause the Turbo Signal Valve Position error
Can anyone shed any light on this ?
He managed to turn the fault off and the car is like a different car now as the turbo seems to do what its supposed to do .
Hopefully the fault wont reappear or its a dodgy connection as I was looking about the car today and all the pipes seem ok .
take sensor off turbo and give it a clean
__________________
Great deals on car keys contact me 07599587119
trustme is offline   Reply With Quote Quick reply to this message
Old 09-10-14, 07:43 PM   #3
Inactive User
 
Join Date: Aug 2014
Location: St Helens
Posts: 49
Default

Quote:
Originally Posted by trustme View Post
take sensor off turbo and give it a clean
I know this is going to probably sound dumb but is the sensor on the turbo or is it somewhere else ?
Sorry to sound dumb but planes are my thing , cars are alien to me.lol
mr_rusty is offline   Reply With Quote Quick reply to this message
 
Old 09-10-14, 08:20 PM   #4
Inactive User
 
Join Date: Aug 2014
Location: St Helens
Posts: 49
Default

I think I have found it .
Is it the triangle shaped thing on top of the turbo ?
Seems like a bit of a pigs ear to get to .
Can I clean it with some Valvoline turbo cleaner ?
A friend reckons he puts this into his air intake to clean his turbo but that sounds a bit dodgy to me
fhmboy likes this.
mr_rusty is offline   Reply With Quote Quick reply to this message
Old 10-10-14, 08:13 AM   #5
Moderator
 
Gibbo's Avatar
 
Join Date: Apr 2011
Location: Southport
Posts: 11,657
Default

Depends what you're cleaning. I tend to use electrical contact cleaner on sensors and their connections.
__________________
Planet Diags: Sefton - Merseyside
Gibbo is offline   Reply With Quote Quick reply to this message
Old 10-10-14, 05:01 PM   #6
Inactive User
 
Join Date: Aug 2011
Location: Crewe
Posts: 217
Default

Quote:
Originally Posted by mr_rusty View Post
I think I have found it .
Is it the triangle shaped thing on top of the turbo ?
Seems like a bit of a pigs ear to get to .
Can I clean it with some Valvoline turbo cleaner ?
A friend reckons he puts this into his air intake to clean his turbo but that sounds a bit dodgy to me
Ive just had exactley the same problem and faults on mine, tried all the usual cleaners etc, in the intake, in the fuel, cleaned the egr etc etc

mine was the copy position sensor ( the triangular thing you mentioned) its a bit of a pig to get off, you'll nee wither a right angled screwdriver or a stubby no2 pozi/phillips, lean in either from the driver wings or put a mat on the radiator bulkhead and kneel there!!

Take the sensor off and bin the screws, they're crap and you'll probably round them off getting them off, i think i had to resort to a mini set of mole-grips but persevere because they will come off.

Pug don't sell the sensor only the actuator at 600 odd quid, i bought mine from Midland turbo and I've only just thrown the box away with the part number on it.

it was 85 quid delivered and is a direct replacement i spoke to Michael Sargeant and he was very helpful.

they will need your reg and vin to get the part but as long as its the triangular one it should be fine.

I changed the screws for allen headed screws so i could easily tighten them and refitting was about 5 minutes rather then the 40 it took me to get it off!!

both my fault codes were then cleared and have stayed cleared and my turbo sings like the proverbial fat lady and it now goes like a train again

let me know if you need any other details.

Gaz
mr_rusty likes this.
fhmboy is offline   Reply With Quote Quick reply to this message
Old 10-10-14, 10:13 PM   #7
Inactive User
 
Join Date: Aug 2014
Location: St Helens
Posts: 49
Default

Cheers Gaz
I shall look up the number for midland turbo and give them a call .
I,m used to working in crap places on airplanes so hopefully it wont be that bad lol
What size allen screws where they ?
Looking at them they look like m4 maybe

Steve
mr_rusty is offline   Reply With Quote Quick reply to this message
Old 10-10-14, 10:41 PM   #8
Moderator
 
windy1603's Avatar
 
Join Date: Sep 2012
Location: Hertfordshire
Posts: 5,567
Default

They have a ebay site. I think this is for most garret not just TDCI


Electronic Position Sensor for Garrett Turbo Turbochargers 2.0HDi TDCi | eBay
fhmboy likes this.
__________________
DS5 & DS4 DSport 2.0 HDI 2012, 107 1.0 Urban 2006, 208 1.6 e-HDI Feline 2014, Suzuki RGV 250M 1989 (Money Pit)
windy1603 is online now   Reply With Quote Quick reply to this message
Old 11-10-14, 09:06 AM   #9
Inactive User
 
Join Date: Aug 2011
Location: Crewe
Posts: 217
Default

Quote:
Originally Posted by windy1603 View Post
They have a ebay site. I think this is for most garret not just TDCI


Electronic Position Sensor for Garrett Turbo Turbochargers 2.0HDi TDCi | eBay
That's the bad boy! Well found, and yes Steve I think they were 4mm from memory. I work in an engineering suppliers so just grabbed a handful of stainless ones in my lunchhour
fhmboy is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Peugeot Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 09:56 PM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.