ABS / ESP Fault, ABS Pump to blame? - Peugeot Forums
Peugeot Forums - Peueot - Citroen Community
Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise


Go Back   Peugeot Forums > Peugeot Models > 407
PeugeotForums.com is the premier Peugeot All Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
Old 14-04-13, 05:17 PM   #1
Inactive User
 
Join Date: Feb 2013
Posts: 89
Default ABS / ESP Fault, ABS Pump to blame?

Hi all,

I have the (what appears to be relatively common) ESP / ASR Fault showing up on my dashboard on a 2005 Peugeot 407.

The car has been tested with planet and the fault code that won't clear is: ESP /ABS ECU: permanent fault pressure sensor supply. I thought abs sensors because of the widespread issues people have had but now I suspect not. Fault code in planet is C1300. I checked the brake switch and it is operating fine.

I understand the fault lies with the pressure sensor in the ABS pump block, can anyone confirm this? The reason I ask is because there is brake pressure shown in planet under parameters which varies from 0 up to circa 22 bar depending how hard the brake pedal is pressed... I also noticed that if I press the brake then erase the code whilst it is pressed in, it stays cleared until I depress the brake. Thought that was a bit strange?

Any help would be appreciated before I go for the ABS Pump change... Thanks.
tecas is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 14-04-13, 05:21 PM   #2
davidireland
Guest
 
Posts: n/a
Default

No other fix. You need a hydraulic block. Ive had a few with this problem.

Sent from AutoGuide.com Free App
  Reply With Quote Quick reply to this message
Old 14-04-13, 05:25 PM   #3
Inactive User
 
Join Date: Feb 2013
Posts: 89
Default

Quote:
Originally Posted by davidireland View Post
No other fix. You need a hydraulic block. Ive had a few with this problem.

Sent from AutoGuide.com Free App
Hi David,

Appreciate the fast response. On the used market, would I need to find the exact same part number that's imprinted on the block itself? I checked in servicebox but the Peugeot part number has no resemblance to any on eBay etc, or the part number on the block itself...

Thanks.
tecas is offline   Reply With Quote Quick reply to this message
 
Old 14-04-13, 05:30 PM   #4
davidireland
Guest
 
Posts: n/a
Default

Theres a "96" number on the unit. Use that.

Sent from AutoGuide.com Free App
  Reply With Quote Quick reply to this message
Old 14-04-13, 05:36 PM   #5
Inactive User
 
Join Date: Feb 2013
Posts: 89
Default

Quote:
Originally Posted by davidireland View Post
Theres a "96" number on the unit. Use that.

Sent from AutoGuide.com Free App
Thanks David. Just checked on eBay etc and seems this part is rare on the used market and when it's available it's around 200. I guess it's time to go searching the scrappies!

Last edited by tecas; 14-04-13 at 06:01 PM.
tecas is offline   Reply With Quote Quick reply to this message
Old 25-04-13, 10:18 PM   #6
Inactive User
 
Join Date: Feb 2013
Posts: 89
Default

Update: Got a second hand ABS Pump of a scrapped car, same '96' number. Installed then configed and bled system, no faults and ESP display fault gone. Thanks for your help davidireland! Now on to the exhaust/manifold fix...
tecas is offline   Reply With Quote Quick reply to this message
Old 17-05-13, 06:05 PM   #7
Junior Member
 
Join Date: Apr 2013
Posts: 28
Default

Hi, I too have a problem with my ABS pump, and I'm just after some advice on the coding/config of a pump when changing it.
I have the cable and PP/diagbox but I'm new to the car and the cable/sw.
How do you code the new pump?
Thanks
__________________
Got:308mk2
Had:106Gti/Quiki,306Dt/Hdi,207GTHdi
scoppack is offline   Reply With Quote Quick reply to this message
Old 18-05-13, 05:32 PM   #8
Inactive User
 
Join Date: Feb 2013
Posts: 89
Default

Quote:
Originally Posted by scoppack View Post
Hi, I too have a problem with my ABS pump, and I'm just after some advice on the coding/config of a pump when changing it.
I have the cable and PP/diagbox but I'm new to the car and the cable/sw.
How do you code the new pump?
Thanks
Quite easy when you have Planet, you go into the ECU for that module then configuration and choose the correct options for engine type, wheel type etc (there are not many options there).
tecas is offline   Reply With Quote Quick reply to this message
Old 18-05-13, 05:49 PM   #9
Senior Member
 
bettyswollocks's Avatar
 
Join Date: Mar 2009
Location: Northern Ireland
Posts: 9,737
Default

Read original configuration first and save it


Sent from AutoGuide.com Free App
bettyswollocks is offline   Reply With Quote Quick reply to this message
Old 18-05-13, 07:31 PM   #10
Junior Member
 
Join Date: Apr 2013
Posts: 28
Default

Many thanks, I have seen this screen and saved it.
The way Peugeot was talking it made it sound like the Black Arts and needing serials, and security codes and the likes.

Do you know, if the 96xxxxx number and the peugeot part 4541xx number are the same on the pump, should it work? as i have found a spare pump, and those numbers match, but the 10.xxxx-xxxx.x numbers are different.
__________________
Got:308mk2
Had:106Gti/Quiki,306Dt/Hdi,207GTHdi
scoppack is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Peugeot Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 01:22 PM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.