|Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise|
|22-04-19, 04:56 PM||#1|
Join Date: Feb 2018
after a recent crash where my airbags blew up, i replaced the seats in my pug 406. the new seats have built in heating which my old ones did not.
when replacing the seats i also put in the buttons for the seat heating in the middle console, all the cables seem to be present and there is light showing up on the button but i cannot measure any voltage on the connector on the seat.
i have found out that fuse 28 is for the seat heating, but i cannot measure voltage on the thicker cable that connects to the seat heating button.
Do i have to activate the seat heating on PP2000? i was looking around and couldnt find anywhere to activate it.
any help here would be much appreciated.
|04-05-19, 10:50 AM||#2|
Join Date: Jul 2015
Have you measured the resistance over the seat heater elements at there connector plug under the seat?
I used to have a 405 Executive with factory fitted leather heated front seats & due to a Peugeot design flaw the heating elements would burn out.
I ended up taking the seats apart, repairing the heating elements & then modifying the circuit to stop them burning out again in the future.
If the 406 is the same set up with a simple on & off via a button its likely to be the same set up as the 405.
308 Allure 1.2 Puretech 130 hatch panoramic roof
|Thread||Thread Starter||Forum||Replies||Last Post|
|Problem with rear seat locks (under the seat)||paparazzo71||308 (2007-2014)||5||11-07-19 01:00 PM|
|Seat heating stopped working- 508 1.6 auto||Ashwani||508 (2011-18)||8||24-02-19 05:07 PM|
|middle seat belt in back seat||micaa001||Interior||4||13-01-16 02:21 PM|
|Car won't start, thinks there's a child seat on passenger seat||mcf07||General Discussion||1||11-08-15 10:25 AM|
|Seat Belt extender needed for rear passenger seat...help !||cottontop||307||3||24-08-14 11:18 AM|