|Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise|
|22-03-17, 06:11 PM||#1|
Join Date: Mar 2017
Peugeot 406 - p0190 fault code
I've got a problem with my peugeot 406 2.0 HDI 66kW (2000).
When i press gas pedal to the floor, the engine cuts off a won't start for few minutes.
The car computer says: "ANTIPOLLUTION FAULT".
When I've plugged my car onto diagnostic, it shows fault code P0190 HIGH FUEL LEAK.
So I've searched on the internet and the most common issue with this fault code was bad fuel pressure sensor. So I've replaced it, but the engine cuts off in load again.
So the second common issue was DRV valve - high pressure regulator valve. Again - replaced, but with no change.. I've heard something about fuel filter.. Yeah I've changed it, it was quite dirty. But with no luck.
I have also noticed, that the fuel pump doesn't turn off, when I've got key in ignition. In all cars the fuel pump runs for few seconds, and when the pressure is reached, it turns off.
I think, that the fuel pump in my car never stopped, since I've bought it few years ago from first owner. Is it normal in this car?
Do you think, that is it a wrong fuel pump, or rellay? What else could cause P0190 fault code?
I would be very grateful, if someone will help me.
PS: excuse my english. I'm from Czech Republic.
|22-03-17, 06:29 PM||#2|
Join Date: Oct 2012
You have a fuel leak under high loads this is all that is wrong it may be a bad injector it may be a bad pipe connection it may be the fuel pump on the engine is recirculating too much fuel but that is the reason for the antipollution display fix the leak the rest will fix itself
Leaking injectors or fuel recirculating is not easy to see so would need proper live data readings
assume nothing check everything twice !!