Rear discs and pads - Peugeot Forums
Peugeot Forums - Peueot - Citroen Community
Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise


Go Back   Peugeot Forums > Peugeot Models > 307
PeugeotForums.com is the premier Peugeot All Forum on the internet. Registered Users do not see the above ads.
Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 12-11-17, 09:49 AM   #1
Senior Member
 
TazR6's Avatar
 
Join Date: Jan 2014
Location: Nottingham
Posts: 365
Default Rear discs and pads

Does anyone know definitively what discs and pads I need for me 307 2.0 HDi 90?
Using servicebox, it tells me "Several references available. Use the nomenclature".
Cross referencing elsewhere also gives me multiple choices for both, such as at
https://www.buycarparts.co.uk/peugeo...B0%5D=402&rp=1 and https://www.buycarparts.co.uk/peugeo...B0%5D=402&rp=1.
I know for sure that if I guess, I will choose the wrong ones, so any guidance would be appreciated a great deal.

Thanks in advance for your time and trouble,

Neil
__________________
'03 307 2.0 90 (125)
5EB Yamaha R6
TazR6 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 12-11-17, 06:48 PM   #2
Senior Member
 
Join Date: Oct 2013
Location: near Brussels
Posts: 687
Default

sounds like you may need to wip a wheel off and have a look under caliper....
britinbe is offline   Reply With Quote Quick reply to this message
Old 12-11-17, 09:00 PM   #3
Senior Member
 
Join Date: Feb 2006
Location: Surrey
Posts: 2,136
Default

Quite often more than one make of calliper is fitted to a production run as in Girling and Teves etc. The only way to be certain is to remove the wheel and look for yourself. Often the supplier listing has a picture of the pads which will help in identification.
The Haynes manual does give pictures which help.
__________________
Brian,
2015 308 SW II Allure 1.6 Blue HDi 120.
Brilec is offline   Reply With Quote Quick reply to this message
 
Old 12-11-17, 09:27 PM   #4
Senior Member
 
TazR6's Avatar
 
Join Date: Jan 2014
Location: Nottingham
Posts: 365
Default

I think you're both correct. I'm have to have a look. I should be able to gauge the size as one is looking and thin, and the other is more square.
__________________
'03 307 2.0 90 (125)
5EB Yamaha R6
TazR6 is offline   Reply With Quote Quick reply to this message
Old 13-11-17, 07:47 AM   #5
Senior Member
 
Join Date: Oct 2015
Location: Cap D'Agde, France
Posts: 251
Default

Hi,

Be aware that 2 types of disc brakes are fitted to the 2.0 HDi 90. One type is a separate disc and is easy and cheap to change. The other is incorperated with the hub and is expensive and harder to fit.
Guess which type mine had!!!
My discs were worn and so I thought I would replace then as the pads had worn out but when I realised it was going to cost me 400 euros to replace them I decided to just change the pads. Afterall the back brakes are not as important as the fronts. They only keep the rear end behind the front end when braking!!
patspiercing is offline   Reply With Quote Quick reply to this message
Old 13-11-17, 07:50 AM   #6
Senior Member
 
Join Date: Oct 2012
Location: falkirk
Posts: 14,049
Default

Adding to above if you do need the type with 1 piece disc/hub be sure to sort out your ABS sensors while in there or your fresh disc will get the ring damaged causing you more issues

Also make sure the new discs actually have the rings as i have seen some with them missing !!
__________________
assume nothing check everything twice !!
reliable406 is offline   Reply With Quote Quick reply to this message
Old 13-11-17, 11:22 AM   #7
Senior Member
 
TazR6's Avatar
 
Join Date: Jan 2014
Location: Nottingham
Posts: 365
Default

Luckily mine is the easier type, without the built in bearing.

I think I've sorted which I need, which had better be right as I've ordered more Brembo discs and pads to match the front.
Fingers crossed.
Thank you very much for the input
__________________
'03 307 2.0 90 (125)
5EB Yamaha R6

Last edited by TazR6; 14-11-17 at 05:45 PM.
TazR6 is offline   Reply With Quote Quick reply to this message
Old 14-11-17, 08:01 AM   #8
Senior Member
 
Join Date: Jul 2012
Posts: 3,415
Default

The cheaper type are super cheap and never really wear I still have a pair of discs in the garage I brought in case lol


Sent from my iPhone using Tapatalk
TazR6 likes this.
__________________
Peugeot 307 2.0hdi 110bhp Peugeot 308 1.6hdi110bhp
monty9120 is offline   Reply With Quote Quick reply to this message
Old 14-11-17, 08:28 AM   #9
Senior Member
 
Join Date: Oct 2013
Location: near Brussels
Posts: 687
Default

Agree, they are pretty cheap and don't wear too much. I'm in the habit of changing mine when I do the pads.....looks nicer under the wheels and for the MOT/APK/Controle Technique
britinbe is offline   Reply With Quote Quick reply to this message
Old 14-11-17, 12:30 PM   #10
Moderator
 
Gibbo's Avatar
 
Join Date: Apr 2011
Location: Southport
Posts: 11,622
Default

VIN in Servicebox should tell you what it was fitted with.

Mine were 266mm
__________________
Planet Diags: Sefton - Merseyside
Gibbo is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Peugeot Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 04:37 AM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.