Imformation neaded fast please - Peugeot Forums
Peugeot Forums - Peueot - Citroen Community
Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise

Go Back   Peugeot Forums > Peugeot Models > 307 is the premier Peugeot All Forum on the internet. Registered Users do not see the above ads.
LinkBack Thread Tools Display Modes
Old 16-03-19, 11:30 PM   #1
Join Date: Jan 2019
Posts: 34
Default Imformation neaded fast please

I am new to these vehicles

I had a new clutch fitted
the pedal as a return spring and the gap to the rest position to commence pressure on the clutch is 60cm , that appears a long way for free play

Now this happened a few times
no gears so with a many foot presses on the clutch and wiggling the gear stick it becomes normal and stay that way until the next time

some time a hard shift from third to second

?? whats the problem and how to fix

SEcond strange
this could be the clutch installation fault
the motor runs missing yet the injectors all operate
then next time it runs normal but a slight idle shake

since the clutch job the internal computer display is not lit the globes have been replaced

Last edited by xenon1; 16-03-19 at 11:35 PM. Reason: correction
xenon1 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Old 17-03-19, 09:11 AM   #2
Senior Member
Join Date: Nov 2017
Posts: 282

Suspect clutch install fault

If they have just fitted a 3 piece clutch ? and never inspected or advised a gearbox nose cone shaft that release bearing slides on

Maybe the new release bearing is getting stuck on shaft

all depends on how they have reassembled Gbox

Gear change cables
Bleeding of clutch ?

It might just be a just as simple as the new clutch has been too much for old slave cylinder to operate

Lets hope for a cheap fix
Check clutch slave cylinder operation ? bleed it up .. recheck ?
Clansman is offline   Reply With Quote Quick reply to this message
Old 17-03-19, 11:19 PM   #3
Join Date: Jan 2019
Posts: 34
Default greatly appreciate

now what would cause the motor to have these problems could the incorrect re connection of the battery be the problem lost the information to the computer
xenon1 is offline   Reply With Quote Quick reply to this message
Old 18-03-19, 10:16 AM   #4
Senior Member
Join Date: Sep 2016
Location: Stoke on Trent
Posts: 1,737

Sort the gearbox problem then think about the other ones and if necessary start separate threads of their defect.
madbadandold is online now   Reply With Quote Quick reply to this message
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the Peugeot Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
peugeot 306 fast idle thermostatic sensor steviebax 306 6 11-04-13 08:46 PM
How fast is your DiagBox(LEXIA 3) computer Pugman120 General Discussion 4 24-01-13 11:58 AM
Peugeot 307 loud fast ticking sound? gcltd 307 6 07-02-12 08:53 PM
Too fast in heavy rain Karl68s Off-topic 15 25-11-11 07:18 PM
wipers too fast on intermittent setting wal750 307 0 25-10-11 08:14 PM

All times are GMT. The time now is 02:32 PM.

Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.