|Home :: Peugeot Forums :: Rules :: Articles :: About Us :: Partner Vendors :: Advertise|
|12-05-18, 09:09 PM||#1|
Join Date: May 2018
Another p0341 code - already changed the camshaft sensor.
Looking for advice or suggestions,
Petrol 1.6 16v (120)
Anti pollution and EML, showing:
P0341 Inlet Cylinder Reference Sensor Signal Coherence
I have changed what I believe to be the inlet camshaft position sensor (the rear most one) although I've seen a video stating it's the front one?
Anything I can check? Any way to check the timing with a diagnostic machine?
I'd much rather it be something simpler than the timing being out a tooth or so.
I'm confident mechanically however, competence may be another story.
Any advice or suggestions appreciated as I have a 3 hour drive on Monday.
|13-05-18, 10:18 AM||#2|
Join Date: Apr 2014
Location: west midlands
would be ideal to change the chain at 65k, but i would be having a look at valve timing.You will need the lock set to do it.
could be so many things causing the problem chain/guides/tensioner/sticky pulley/solenoid.
i would remove clean the rear solenoid first,easy enough, just remove air filter/housing and throttle body pipe
and yes inlet is the rear sensor.