![]() |
| |
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 |
|
Junior Member
Join Date: Nov 2010
Location: mid wales
Posts: 12
|
I have a 2008 partner combi with the 1.6hdi engine
I have found that starting from cold it sounds a bit lumpy for the first few seconds and I get a small puff of smoke when it fires. It seems to fire right away with out having to crank for long It's fine after the first start, at first I thought it was the cold weather but now I am wondering if the glowplugs need changing. It has done 43500 miles and I have only owned it for 3 months so don't know if or when they need changing the mpg was poor when I first had it (42mpg) so I stuck a tank of redex diesel cleaner through it and now it's doing 46.2mpg but I don't know if thats why it's started to smoke now on start up, Can't remember it doing it when I first had it as I was standing behind it when I went to look at it at the garage thanks David
__________________
Peugeot Partner Combi Escapade 1.6 HDi Last edited by dwrowley; 02-08-2011 at 04:31 PM. |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Junior Member
Join Date: Jan 2011
Posts: 14
|
Hya , Although I'm not at an expert , i posted a similar problem with my Partner. I must say mine isn't the HDI version , shes a DW8 series. When testing my glow plugs i found 2 where ok , the third below standard , and the forth was totally dead , yet like you , she cranked and started first time.
Anyhow changed all four , and haven't had a problem since. I'm not saying that will cure your situation , just thought the info may help. |
|
|
|
|
|
#3 |
|
Senior Member
Join Date: Jan 2010
Location: Southern Ireland
Posts: 2,333
|
Get a diagnostic check done. If there are any faults relating to preheat/control relay then the heater plugs need replacing.
They are not essential in a 1.6hdi, 9hy/9hu/ engine without particle filter. But changing them will fix your lumpy idle. As I said get it checked first and post up the faults.
__________________
Peugeot Master Tech/Citroen Tech |
|
|
|
|
|
#4 |
|
Junior Member
Join Date: Nov 2010
Location: mid wales
Posts: 12
|
thanks for the replies
I will get it booked in for a check up on Saturday and post the results after thanks again David
__________________
Peugeot Partner Combi Escapade 1.6 HDi |
|
|
|
|
|
#5 |
|
Junior Member
Join Date: Nov 2010
Location: mid wales
Posts: 12
|
rang the local dealer today
__________________
Peugeot Partner Combi Escapade 1.6 HDi |
|
|
|
|
|
#6 |
|
Junior Member
Join Date: Nov 2010
Location: mid wales
Posts: 12
|
and got an appointment to pop it in on Saturday morning
I will post the results after David
__________________
Peugeot Partner Combi Escapade 1.6 HDi |
|
|
|
|
|
#7 |
|
Junior Member
Join Date: Nov 2010
Location: mid wales
Posts: 12
|
I managed to do a couple of videos of the smoke on a cold ctart up
http://www.youtube.com/watch?v=Kn2YjcC4oVg http://www.youtube.com/watch?v=4Whnxq3gQVE http://www.youtube.com/watch?v=tJrSnL7uBfs David
__________________
Peugeot Partner Combi Escapade 1.6 HDi Last edited by dwrowley; 02-08-2011 at 04:23 PM. |
|
|
|
|
|
#8 |
|
Junior Member
Join Date: Nov 2010
Location: mid wales
Posts: 12
|
got back today after visiting the dealers and no problems found
They had a 2008 model the same as mine with 28k on the clock and that started like mine with a bit of smoke at the start. Also spoke to some one else in the village who has a 2006 with 60k and that smokes as well so it must be a common thing on these when starting up from cold thanks David
__________________
Peugeot Partner Combi Escapade 1.6 HDi |
|
|
|
|
|
#9 |
|
Senior Member
Join Date: Jun 2009
Location: Galway Ireland
Posts: 401
|
if you get a smell of that blue/white smoke then you should know weather its burnt diesel or burnt oil....report back....
__________________
www.407owners.com/forums |
|
|
|
|
|
#10 |
|
Senior Member
Join Date: Jan 2010
Location: Southern Ireland
Posts: 2,333
|
I'd reckon the ecu will have a faults relating to pre/post heating relay circuit, spark plugs not supplied.
This fault is heater plug failure.
__________________
Peugeot Master Tech/Citroen Tech |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|