2003 Boxer Hdi coolant gauge problem

alan12666 · 07-31-2009, 03:51 PM

Hi,

Coolant gauge on our 2.8Hdi 2003 Boxer is stuck at midrange, even on a completely cold engine as soon as the ignition is turned on.

I'm assuming it's gauge, wiring, or sender. But the manual we have doesn't have much info in it. Can anybody help with the following please:
- where is the coolant sender for the gauge located on the engine?
- is there a separate sender for gauge and ECU?
- any other ideas for what it might be please

???

Thanks in advance

Alan

**Stubbo** · 08-01-2009, 11:07 AM

A very un-technical answer here but just give the top of the dash a bit of a whack, usually frees up stuck guages!

07-31-2009, 03:51 PM	#1
alan12666 Junior Member Join Date: Jul 2009 Location: Midlands Posts: 1	2003 Boxer Hdi coolant gauge problem Hi, Coolant gauge on our 2.8Hdi 2003 Boxer is stuck at midrange, even on a completely cold engine as soon as the ignition is turned on. I'm assuming it's gauge, wiring, or sender. But the manual we have doesn't have much info in it. Can anybody help with the following please: - where is the coolant sender for the gauge located on the engine? - is there a separate sender for gauge and ECU? - any other ideas for what it might be please ??? Thanks in advance Alan Share Share this post on Digg Del.icio.us Technorati Twitter

08-01-2009, 11:07 AM	#2
Stubbo Moderator Join Date: Mar 2009 Location: Cheshire Posts: 1,220	A very un-technical answer here but just give the top of the dash a bit of a whack, usually frees up stuck guages! Share Share this post on Digg Del.icio.us Technorati Twitter __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement