wrongly disconnected battery

sissonk · 12-19-2011, 09:32 PM

well I took the battery terminal off to clean , was very corroded . this was about 3weeks after getting the car . its a 2.2 DHi 406 coupe . It has never ran the same since , the turbo doesn't kick in like the sports mode it use to have. It is very much like my old 02 406 2.0 hdi , no turbo kik atall .
So I wonder did the Software go to a default setting or something else ?
great info on this site and has been great help to me . thanks all

Gibbo · 12-20-2011, 08:49 AM

Did you perform a BSI Reset?

There's a special procedure when reconnecting the battery.

sissonk · 12-20-2011, 09:47 AM

no I didn't ,, how do you do it ?

Gibbo · 12-20-2011, 01:01 PM

Put the driver's window down, lift the bonnet and ensure all equipment is switched off.

Ensure all doors are closed and remove key from the ignition.

Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.

Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).

Switch on the side lights through the driver's window.

Switch on the ignition and check system's functionality.

Hold lock button on key down for 10 seconds.

Remove key open & close door test central locking system.

Start the engine and complete the system's check.

Failure to follow this procedure could result in incorrect operation of many BSI related items.

sissonk · 12-20-2011, 04:37 PM

Thanks Gibbo I did the reset and everything seems ok

sissonk · 12-28-2011, 12:25 PM

I connected PP2000 and got this error for the BSI
Intermittent Fault Transponder Identifier not received
also
ABS or ESP Absence of communication with the engine ECU
Intermittent fault.
any idea what this transponder Identifier is ?

**john_h** · 12-28-2011, 02:16 PM

immobiliser?

teerak2uk · 12-29-2011, 09:19 AM

Quote:

Originally Posted by sissonk

I connected PP2000 and got this error for the BSI
Intermittent Fault Transponder Identifier not received
also
ABS or ESP Absence of communication with the engine ECU
Intermittent fault.
any idea what this transponder Identifier is ?

Codes have probably been there some time just make a note
of them and then see if they come back as you never know who has
Been in there unplugging stuff in the past

12-19-2011, 09:32 PM	#1
sissonk Junior Member Join Date: Nov 2011 Location: N. Co. Dublin Ireland Posts: 16	wrongly disconnected battery well I took the battery terminal off to clean , was very corroded . this was about 3weeks after getting the car . its a 2.2 DHi 406 coupe . It has never ran the same since , the turbo doesn't kick in like the sports mode it use to have. It is very much like my old 02 406 2.0 hdi , no turbo kik atall . So I wonder did the Software go to a default setting or something else ? great info on this site and has been great help to me . thanks all Share Share this post on Digg Del.icio.us Technorati Twitter

12-20-2011, 08:49 AM	#2
Gibbo Senior Member Join Date: Apr 2011 Location: North Wirral Posts: 1,172	Did you perform a BSI Reset? There's a special procedure when reconnecting the battery. Share Share this post on Digg Del.icio.us Technorati Twitter __________________ PP Service: Cheshire, Merseyside, NE Wales 307 SE

12-20-2011, 09:47 AM	#3
sissonk Junior Member Join Date: Nov 2011 Location: N. Co. Dublin Ireland Posts: 16	no I didn't ,, how do you do it ? Share Share this post on Digg Del.icio.us Technorati Twitter

12-20-2011, 01:01 PM	#4
Gibbo Senior Member Join Date: Apr 2011 Location: North Wirral Posts: 1,172	Put the driver's window down, lift the bonnet and ensure all equipment is switched off. Ensure all doors are closed and remove key from the ignition. Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds. Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.). Switch on the side lights through the driver's window. Switch on the ignition and check system's functionality. Hold lock button on key down for 10 seconds. Remove key open & close door test central locking system. Start the engine and complete the system's check. Failure to follow this procedure could result in incorrect operation of many BSI related items. Share Share this post on Digg Del.icio.us Technorati Twitter __________________ PP Service: Cheshire, Merseyside, NE Wales 307 SE

12-20-2011, 04:37 PM	#5
sissonk Junior Member Join Date: Nov 2011 Location: N. Co. Dublin Ireland Posts: 16	Thanks Gibbo I did the reset and everything seems ok Share Share this post on Digg Del.icio.us Technorati Twitter Gibbo likes this.

12-28-2011, 12:25 PM	#6
sissonk Junior Member Join Date: Nov 2011 Location: N. Co. Dublin Ireland Posts: 16	I connected PP2000 and got this error for the BSI Intermittent Fault Transponder Identifier not received also ABS or ESP Absence of communication with the engine ECU Intermittent fault. any idea what this transponder Identifier is ? Share Share this post on Digg Del.icio.us Technorati Twitter

12-28-2011, 02:16 PM	#7
john_h Super Moderator Join Date: Nov 2009 Location: Gateshead Posts: 3,796	immobiliser? Share Share this post on Digg Del.icio.us Technorati Twitter __________________ *John H* *!!!READ THIS FULLY BEFORE POSTING NEW THREADS/POSTS!!!* *Peugot Planet Map* *Used to Own:* Peugeot 307 1.6 Rapier, 4 cyl, 16V, Go-Go Juice, 5 door, 2001, blue *What Happened to My 307* *Now currently Owns:* Ford Focus 1.8 TDCI, Climate Pack, 5 door, 2006, silver

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode