Installing PP2000

prabbitt · 01-24-2012, 09:05 AM

I have installed PP2000 lexia 3. Now when i plug in the usb code reader to the pc windows recognizes that it is new hardware, then i try to install the drivers needed from the cd disk. Half way through doing so it asks me to use a different cd called actia. It seems that i need the actia USB comms board multi instance driver. I have looked around and i am struggling to find it. Help please, once i have the system working i will use it to help others

CAB · 01-24-2012, 09:39 AM

Every install of planet I've done the comp has found the drivers as soon as the usb was connected.

**bettyswollocks** · 01-24-2012, 03:27 PM

Is it a Lexia interface or just a ordinary cable?

jmkent · 01-24-2012, 04:21 PM

Did you follow the instructions at Peugeot Planet Installation, Activation and Updating Manuals , and in particular the step relating to shutdown computer, plug in usb, and then switch back on?
I followed these to the letter, and all worked OK.

Karl68s · 01-24-2012, 04:55 PM

That driver is for your computers USB ports and nothing to do with PP.
But then the solution can be found here USB Com Board Driver ( Multi-instance ) - Free software downloads and software reviews - CNET Download.com

01-24-2012, 09:05 AM	#1
prabbitt Junior Member Join Date: Jan 2012 Posts: 2	Installing PP2000 I have installed PP2000 lexia 3. Now when i plug in the usb code reader to the pc windows recognizes that it is new hardware, then i try to install the drivers needed from the cd disk. Half way through doing so it asks me to use a different cd called actia. It seems that i need the actia USB comms board multi instance driver. I have looked around and i am struggling to find it. Help please, once i have the system working i will use it to help others Share Share this post on Digg Del.icio.us Technorati Twitter

01-24-2012, 09:39 AM	#2
CAB Senior Member Join Date: Feb 2011 Location: Edenthorpe,Doncaster, South Yorkshire & Gilberdyke, East Yorkshire Posts: 706	Every install of planet I've done the comp has found the drivers as soon as the usb was connected. Share Share this post on Digg Del.icio.us Technorati Twitter __________________ PUG CIT VW AUDI SEAT SKODA VAUXHALL DIAGNOSTIC

01-24-2012, 03:27 PM	#3
bettyswollocks Super Moderator Join Date: Mar 2009 Location: Northern Ireland Posts: 7,757	Is it a Lexia interface or just a ordinary cable? Share Share this post on Digg Del.icio.us Technorati Twitter __________________ Peugeot Pin Codes Click here Citroen Pin Codes Click here Email Me Here

01-24-2012, 04:21 PM	#4
jmkent Senior Member Join Date: Sep 2010 Location: St Austell, Cornwall Posts: 2,979	Did you follow the instructions at Peugeot Planet Installation, Activation and Updating Manuals , and in particular the step relating to shutdown computer, plug in usb, and then switch back on? I followed these to the letter, and all worked OK. Share Share this post on Digg Del.icio.us Technorati Twitter __________________ 407SW 2.0HDI 136 SE 2005 ex. 306 2.0HDI 90 (x2)

01-24-2012, 04:55 PM	#5
Karl68s Senior Member Join Date: Aug 2011 Location: Glasgow Posts: 202	That driver is for your computers USB ports and nothing to do with PP. But then the solution can be found here USB Com Board Driver ( Multi-instance ) - Free software downloads and software reviews - CNET Download.com Share Share this post on Digg Del.icio.us Technorati Twitter __________________ Megane 1.9 DCI Dynamique Partner 1.6 HDI

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode