RD4 radio acting strange after using planet

[peteg4vsx]

I am new to using planet 2000 and decided to test it by enabling aux2 on the rd4 radio. First attempt failed, however I must have activated something else instead. Dont laught but this is what happens now.
Pressing the source button toggles between cd, cd multichanger and radio and aux2.
Radio switches on as normal and stays on as long as the engine is running.
When I Turn off the engine, then the radio turns off. If I turn on the radio it stays on for only 1 Minuite then turns off as the vent servo kicks in.
I dont see economy mode come up as its way too early for that to kick in.
Now the funny part,, when I open the drivers door the radio comes back on.

I must have messed up looking in the pp2000 menu's.
A little knowlage is dangerous.
Any help appreciated

[bettyswollocks]

If you log back into the radio page on pp and take a photo of what settings you have maybe someone will be good enough to check to see what is different and you can reset it.

[john_h]

yeah defo what betty says...get a pic up and will take a look...sounds to me like an auto-off function but with peugeot electronics doesnt work right

[peteg4vsx]

Thanks for that, much appreciated. I will grab some screen dumps.
Must admit I am a bit reluctant now to go into some menu's incase I screw it up even more. Thinking on I did go in one menu that related to battery voltage, the software came up with "switch ignition off" which I did, then I was asked to measure voltage, as I did not have a meter handy I just exited from the software. I bet that has caused the issue.

[paddy69]

Mmm, thanks for posting that Pete!
My radio is doing much the same but I only noticed yesterday. I don't use the car much (wife has it) but had it to pick up from school yesterday. I was early so stuck the radio on (car off) It did about a minute and then went off! Oh well, went out early to pick him up. When I came back and opened the door, RADIO came on!
NOW,I had been in the radio settings when I had Lexia and probably changed something. Trouble is, my Lexia went belly up! The people I bought it off In China said send it back. I think they have been having a lot of problems with their clones. I am just waiting to see now if they are going to make alterations to make it more robust! It did work for a while. So at present I can't access with PP2000 to change anything with the radio.
Hopefully I will get my Lexia back working!
Phil

[davidireland]

Ah the beauty of being able to do automatic configuration from the server in France!!
Only messing, get up some pics of the configuration.

[peteg4vsx]

Hi all, Sorry for the delay, had an issue getting the PP2000 to communicate with the ECU, seems that Virtual PC running XP has gone belly up.

Anyway after loading pp2000 on a dedicated xp laptop I can get it to connect again.

Today I went through all the settings again and could not see any obvious settings causing the issue.

So pleased getting the connection back I forgot to grab some screen shots.

I will grab some asap.

Thanks

Pete

[bettyswollocks]

What you need is someone with the same car to see what is different between the two.

[paddy69]

Are we any further with this????
I have got back a working Lexia from China (much to my surprise!)
I have had a look in the settings for radio and can't see anything amiss!!
I am just updating PP2000 as I was connected with the updated software when something got changed. Could it be that the newer version has some more options that aren't showing in the older version??
Time will tell!
Phil

[paddy69]

I have sorted mine! Took a lot of fiddling and I am not entirely sure what I did
But it is back to normal
Phil