![]() |
| |
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 |
|
Junior Member
Join Date: Feb 2011
Posts: 1
|
Hi there,
I'm new here so please be gentle. I have a 2002 Partner Combi 1.9diesel (DW8 Poverty Spec!) The heater blower had been cutting in and out before finally dieing. From looking on here and elsewhere, I took a punt on it being a faulty resistor, so I've changed that, but no joy. The motor itself is OK when put straight onto a battery, 'tho it was a bit sticky at 1st. Further investigation shows no power at the connector block for the fan. Don't have a pug manual to identify fuses, only Haynes which does not give correct fuse locations for my model. Any ideas? Is there a relay somewhere? Cheers jonbenj |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Junior Member
Join Date: Feb 2011
Location: Barnstaple. N.Devon
Posts: 8
|
Try the fan relay in the fuse box...it overheats & makes a poor connection I think its a green one
Thinking about it yours is the later model....you have a body controll module behind the n/s headlamp & its controlled from there Last edited by BobT; 02-28-2011 at 06:59 PM. |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|