Need help to reprogram key to immobilser

coconuts · 10-27-2006, 07:15 PM

My brother's 306 wouldn't start this morning cause of a flat battery so he put in a new one and now his key needs to be reprogrammed to the immobilser, any ideas how to do this?
Its a '00 Peugeot 306 HDi.
Any help appreciated

Peugeot 406 · 03-11-2007, 10:52 PM

got this info from pug dealer

1. Turn the Ignition switch to the accessory position using the key without the remote plip attached.
2. Hold the Plip key close to the central locking receiver mounted in the roof console.
3. Press the large plip button and then the small plip button on the remote.
4. Turn the ignition OFF.
5. After 5 seconds the Plip should now operate.

10-27-2006, 07:15 PM	#1
coconuts Junior Member Join Date: Oct 2006 Posts: 1	Need help to reprogram key to immobilser My brother's 306 wouldn't start this morning cause of a flat battery so he put in a new one and now his key needs to be reprogrammed to the immobilser, any ideas how to do this? Its a '00 Peugeot 306 HDi. Any help appreciated Share Share this post on Digg Del.icio.us Technorati Twitter

03-11-2007, 10:52 PM	#2
Peugeot 406 Junior Member Join Date: Mar 2007 Posts: 5	got this info from pug dealer 1. Turn the Ignition switch to the accessory position using the key without the remote plip attached. 2. Hold the Plip key close to the central locking receiver mounted in the roof console. 3. Press the large plip button and then the small plip button on the remote. 4. Turn the ignition OFF. 5. After 5 seconds the Plip should now operate. Share Share this post on Digg Del.icio.us Technorati Twitter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement