Hdi Flywheel trouble can anyone help ???

Conrod C · 06-13-2011, 07:28 PM

Hi, i have a 01 406 hdi 110bhp with the dredded dual mass flywheel which is starting to make a bit of unwanted music (rattling when idling and so on)...i'm told that the 90bhp hdi's have a solid flywheel and i was wondering could this be fitted to the 110 without too much hassle ? ?

...i carry out all the repairs to my cars and would be fairly competent....any feedback greatly appreciated !

clanless · 06-13-2011, 07:39 PM

You can buy solid flywheel conversion kits for the 110 - so go for one of these. Peugeot supply their own - which beggars logic - why the hell are they still fitting dmf's? Thinking about it, the 90bhp flywheel must be 'thinner' than the 110bhp dual mass - so in all probability they will not be interchangeable.

JazzJPH · 06-13-2011, 07:59 PM

Different bits of kit between the 110's and 90's - due to power really.

I had mine done solid conversion on me 307 and it was beautiful after.

Apparently 307's are the worst to do (after the Ford Mondeo) and I got the solid mass clutch conversion kit for £285 and labour for £120.

That's total bottom end prices like, if you can get near that you're laughin!

Something for you to aim for

Conrod C · 06-13-2011, 08:03 PM

Thanks for the reply ! yeah good point sometimes it would make you wonder ! Do you know where i could pick up a solid for cheap enough money or how expensive are the genuine 1's ?

JazzJPH · 06-13-2011, 08:08 PM

The valeo one you want to look for. I just phoned my local motor factors, where are you from?

and you have to be jammy like me and know a garage with not much work, but employ a citroen/peugeot mechanic haha!

Conrod C · 06-13-2011, 08:09 PM

Sounds good jazz ! yeah a friend of mine done a mondeo...i felt so sorry for him

...i see an ad on ebay for a genuine solid kit or should i steer clear ?

Conrod C · 06-13-2011, 08:12 PM

Haha that is a good one alright !

I'm actually from ireland so there could be a bit of postage involved ha

JazzJPH · 06-13-2011, 08:12 PM

not sure what this one is (whether solid or dual mass) but it's not owa expensive:

Peugeot 406 2.0 HDi Clutch Kit & Flywheel - Valeo

and maybe this:

406 806 807 Expert 2.0 HDi SOLID FLYWHEEL Conversion | eBay UK

Conrod C · 06-13-2011, 08:22 PM

Fairplay !! is all i can say !!!

They both look good....think i'll send the 1st one an email find out which it is for sure and let you know ! Thanks a million !!

JazzJPH · 06-13-2011, 08:26 PM

no worries mate!

The added peace of mind comes from your local motor factor who'll take the reg/vin and actually tell you which one he can order in for your motor. It puts the responsibility on him so he will have to get it swapped if it's wrong. Plus if you are within driving distance you can quickly go fetch when he has it in.

06-13-2011, 07:28 PM	#1
Conrod C Junior Member Join Date: Jun 2011 Posts: 12	Hdi Flywheel trouble can anyone help ??? Hi, i have a 01 406 hdi 110bhp with the dredded dual mass flywheel which is starting to make a bit of unwanted music (rattling when idling and so on)...i'm told that the 90bhp hdi's have a solid flywheel and i was wondering could this be fitted to the 110 without too much hassle ? ? ...i carry out all the repairs to my cars and would be fairly competent....any feedback greatly appreciated ! Share Share this post on Digg Del.icio.us Technorati Twitter

06-13-2011, 07:39 PM	#2
clanless Senior Member Join Date: Mar 2010 Posts: 446	You can buy solid flywheel conversion kits for the 110 - so go for one of these. Peugeot supply their own - which beggars logic - why the hell are they still fitting dmf's? Thinking about it, the 90bhp flywheel must be 'thinner' than the 110bhp dual mass - so in all probability they will not be interchangeable. Share Share this post on Digg Del.icio.us Technorati Twitter

06-13-2011, 07:59 PM	#3
JazzJPH Senior Member Join Date: Nov 2010 Location: Durham Posts: 1,562	Different bits of kit between the 110's and 90's - due to power really. I had mine done solid conversion on me 307 and it was beautiful after. Apparently 307's are the worst to do (after the Ford Mondeo) and I got the solid mass clutch conversion kit for £285 and labour for £120. That's total bottom end prices like, if you can get near that you're laughin! Something for you to aim for Share Share this post on Digg Del.icio.us Technorati Twitter __________________ Jazz Current Car 06 Plate Vauxhall Astra 1.9 CDTi SRI 150bhp [Exterior Pack] Previous Cars 53 Plate Peugeot 307 HDI 110 Rapier 02 Plate Peugeot 307 HDI 110 GLX R-Reg Peugeot 306 1.9 D Turbo

06-13-2011, 08:03 PM	#4
Conrod C Junior Member Join Date: Jun 2011 Posts: 12	Thanks for the reply ! yeah good point sometimes it would make you wonder ! Do you know where i could pick up a solid for cheap enough money or how expensive are the genuine 1's ? Share Share this post on Digg Del.icio.us Technorati Twitter

06-13-2011, 08:08 PM	#5
JazzJPH Senior Member Join Date: Nov 2010 Location: Durham Posts: 1,562	The valeo one you want to look for. I just phoned my local motor factors, where are you from? and you have to be jammy like me and know a garage with not much work, but employ a citroen/peugeot mechanic haha! Share Share this post on Digg Del.icio.us Technorati Twitter __________________ Jazz Current Car 06 Plate Vauxhall Astra 1.9 CDTi SRI 150bhp [Exterior Pack] Previous Cars 53 Plate Peugeot 307 HDI 110 Rapier 02 Plate Peugeot 307 HDI 110 GLX R-Reg Peugeot 306 1.9 D Turbo

06-13-2011, 08:09 PM	#6
Conrod C Junior Member Join Date: Jun 2011 Posts: 12	Sounds good jazz ! yeah a friend of mine done a mondeo...i felt so sorry for him ...i see an ad on ebay for a genuine solid kit or should i steer clear ? Share Share this post on Digg Del.icio.us Technorati Twitter

06-13-2011, 08:12 PM	#7
Conrod C Junior Member Join Date: Jun 2011 Posts: 12	Haha that is a good one alright ! I'm actually from ireland so there could be a bit of postage involved ha Share Share this post on Digg Del.icio.us Technorati Twitter

06-13-2011, 08:22 PM	#9
Conrod C Junior Member Join Date: Jun 2011 Posts: 12	Fairplay !! is all i can say !!! They both look good....think i'll send the 1st one an email find out which it is for sure and let you know ! Thanks a million !! Share Share this post on Digg Del.icio.us Technorati Twitter

06-13-2011, 08:26 PM	#10
JazzJPH Senior Member Join Date: Nov 2010 Location: Durham Posts: 1,562	no worries mate! The added peace of mind comes from your local motor factor who'll take the reg/vin and actually tell you which one he can order in for your motor. It puts the responsibility on him so he will have to get it swapped if it's wrong. Plus if you are within driving distance you can quickly go fetch when he has it in. Share Share this post on Digg Del.icio.us Technorati Twitter __________________ Jazz Current Car 06 Plate Vauxhall Astra 1.9 CDTi SRI 150bhp [Exterior Pack] Previous Cars 53 Plate Peugeot 307 HDI 110 Rapier 02 Plate Peugeot 307 HDI 110 GLX R-Reg Peugeot 306 1.9 D Turbo

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode