Scanning 406 Help

[roystonp]

Hello Experts
Just bought PP2000 v22.14 and managed to install OK,when scanning my 406 1761cc year 2000 I only get Engine,ABS and Airbag results. All others come back "ECU not Replied".After entering Build Code the scan screen doesn't show BSI listed as one of the ecu's.
I was hoping to check on the BSI as my central locking has gone haywire.
The car works ok apart from locking.Should I be able to get all ECU scans with this model or have I missed something in my set-up.
I've returned the Scanner for replacement but just wanted your thoughts and help.
Thanks

[davidireland]

Make sure you pick the correct 406. ie neuvelle 406 not just 406 on the planet different models screen.

[roystonp]

Thanks for that will try when I get new unit, I didn't realise there was a choice on models.
Roy

[roystonp]

Originally Posted by davidireland

Make sure you pick the correct 406. ie neuvelle 406 not just 406 on the planet different models screen.

New scanner arrived and working OK.

Now to do a lot of learning!!

Thanks for your help

[john_h]

make sure you take a notepad out and write what changes you have made and location so you can go back and change it if you make a "human error"

[roystonp]

Originally Posted by cck2k9

make sure you take a notepad out and write what changes you have made and location so you can go back and change it if you make a "human error"

Wilco cck2k9,advice noted. I won't be altering any settings hopefully, my philosophy is "if it aint broke don't fix it".

Thanks again
Roy