![]() |
| |
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 |
|
Junior Member
Join Date: Jul 2009
Posts: 1
|
iv been wondering this for some time my 206 is black and has some scratches any help?????????
|
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Super Moderator
Join Date: May 2009
Location: Sunny Scotland
Posts: 567
|
Hi - YES - what do you want to know?!?!
Scratches are usually of three types... Swirls - which look a bit like cob-webs on the paint in bright sunlight. RDS- random deep scratches as they are called - which are in the paint and you can often feel them with your nail... Bad scratches - down through the pain to the primer or metal/plastic base. Swirls are easy enough to either mask, by using a product the fills them, like Autoglym Super Resin polish, or, machine polish out with a product that actually removes them by the removal of a small amount of paint. RDS - these are often again polishable with a machine polish, but often you have to resort to a wet sand - which is exactly what it says. You then have to refine the paint finish with reducing abrasives to bring the finish up to a standard. Wet sanding is usually done with a machine polisher these days - usinga 3" spot pad. Bad scratches - these usually require paint to repair as polishing will do nothing other than make it look worse as you thin the pain around it. I would be aware that detailing is a very adictive "hobby" and you will end up spending loads on different products. End results are good though! David |
|
|
|
|
|
#3 |
|
Junior Member
Join Date: Jul 2009
Location: Qormi, Malta
Posts: 22
|
So what category would scratches made for vindication by keys fall under?
I bought mine with a scratch on the bonnet and another one from the front to the end on the left side. |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|