Peugeot 307 Aluminium Pedals

daffyduck · 09-20-2010, 07:38 PM

Just put these in the 307, the brake and clutch were a bad fit but a bit of diy straightened them up. All you have to do is peel back the rubber covers on the pedals and the holes are already drilled in position. Unfortunately when put on they are not straight so I just put in one bolt then used bit of double sided foam tape (very strong), cut the second bolt and glued it on so looks well. You will need to drill two holes on the accelerator pedal as it does not have a rubber cover.

Pics...

http://s950.photobucket.com/home/daffyduck42/index

09-20-2010, 07:38 PM	#1
daffyduck Senior Member Join Date: Mar 2009 Posts: 831	Peugeot 307 Aluminium Pedals Just put these in the 307, the brake and clutch were a bad fit but a bit of diy straightened them up. All you have to do is peel back the rubber covers on the pedals and the holes are already drilled in position. Unfortunately when put on they are not straight so I just put in one bolt then used bit of double sided foam tape (very strong), cut the second bolt and glued it on so looks well. You will need to drill two holes on the accelerator pedal as it does not have a rubber cover. Pics... http://s950.photobucket.com/home/daffyduck42/index Share Share this post on Digg Del.icio.us Technorati Twitter __________________ Peugeot Planet Diagnostic Owner BlueDash League Member Trip Computer Added

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement