407 Heater Flaps Fault , MonoZone

[bettyswollocks]

This as you know is a fault in 407`s , this is what happened to my Mono Zone , Only cold air , fix by Peugeot is Dash out and replace flaps £1000,

I took mine to a guy who cut it out and replaced , Flaps £60 Labour £70

Pictures are Broken Flaps ,

New improved Flaps

heater Matrix after fix

More pics

[CAB]

Nice repair

Has he ever done a dual zone one?

[bettyswollocks]

Originally Posted by CAB

Nice repair

Has he ever done a dual zone one?

Yes , more dual than mono he does , he says just the exact same way just cut higher up the matrix

[Karl68s]

Did the job take long?
If I add a couple of hours for coffees, swearing and nursing bruised fingers will I get it done, glued back and running in a weekend once it's a bit warmer.

[bettyswollocks]

Originally Posted by Karl68s

Did the job take long?
If I add a couple of hours for coffees, swearing and nursing bruised fingers will I get it done, glued back and running in a weekend once it's a bit warmer.

Left it with him for 3 hours Could have had it sooner

[PaulMooney]

It looks very untidy there to be fair. Its all plastic welded beneath that, I should take photos of it with the plastic welding before I put a film of sealer over just to seal any pinholes. Mono ones are more difficult if Im honest, dual ones are easy beans.

I seen a video on youtube of a boy taking steering column and all out to do this. Duno what the heck he was at. Making work for himself.lol Airbag and glovebox is all thats required moving. I have this job down to 1 1/2 hours.

I have done nearly 20 since November 2011.lol

Have heard of a few fellas doing this round about and also heard of a few horror stories lads..... Couple of them where unfixable when these fellas were finished with them. Im not trying to butter my work up or anything, just dont want peoples heaterboxes ruined!

[bettyswollocks]

Originally Posted by PaulMooney

It looks very untidy there to be fair. Its all plastic welded beneath that, I should take photos of it with the plastic welding before I put a film of sealer over just to seal any pinholes.

You can`t see it unless you`re upside down on the seat , my toe`s are warm and thats what matters mate