RD4 head unit and Aux/iPod - DG 100

[Darth Vader]

This is a continuation of a thread I thought would solve my problem, but it seems it's still there.

As I was having problems with the DG 100 not "talking" properly to an iPod nano 5G a possible solution suggested involved removing the fuse to the RD4 to "reset" it, then reconnect, then try to play my iPod through my DG 100.

It worked up to a point but now I can't select the Aux (1 and 11) input on the RD4. I also still have problems with the DG 100 talking to the iPod nano 5G. So DG mode and UI for the iPod are unavailable.

The head unit also seems to be "locked" on CD 5 and 6, and I can't get out of it although I can use the radio OK.

Will I have to go back to a Peugeot dealer to have the Aux port activated again visa a software reload?

Any help/advice greatly appreciated as this is utterly depressing and has dragged on for weeks since getting the 5G.

If I have to have the head unit "reset" by Peugeot how much will this cost?

[Darth Vader]

Would just like to add a couple of things....

Even though the head unit is "locked" on CD5/6, if I have the iPod in the active cradle, with the head unit on, remove the cable to the Dension, connect it back, and do that a couple of times, eventually I hear music and can operate the iPod using the stalk and change tracks only. However, no other options are available to me.