Hello! and a few questions ;)

Harlequin · 10-13-2011, 12:22 PM

hi , i have an old 806 and was told this is a good palce to ask!

R reg 806 , the airbag light has started flashing , cleaned the connector under the drivers seat (not one under passenger?) and it cures it for about 10 mins , is there a more permamant fix?

Gibbo · 10-13-2011, 12:52 PM

Disconnect and resolder the wires. It's not dirt but a damaged contact or break in the wire.

Harlequin · 10-13-2011, 01:21 PM

awesome thank you - will be interesting since my soldering skills were last used about 20 years ago!

guessing battery disconect ofc before playing with it?

Harlequin · 10-31-2011, 02:10 PM

airbag light is back on ,pulled the connector block apart and theres nothing soldered oO - also it terminates into a plastic connection under the seat - and 2 of the wires dont go into anything

Uploaded with ImageShack.us

heres a picture - the screwdriver is covering the wires which dont seem to actually go anywhere

any help?

10-13-2011, 12:22 PM	#1
Harlequin Junior Member Join Date: Oct 2011 Posts: 10	Hello! and a few questions ;) hi , i have an old 806 and was told this is a good palce to ask! R reg 806 , the airbag light has started flashing , cleaned the connector under the drivers seat (not one under passenger?) and it cures it for about 10 mins , is there a more permamant fix? Share Share this post on Digg Del.icio.us Technorati Twitter Last edited by Harlequin; 10-13-2011 at 01:20 PM.

10-13-2011, 12:52 PM	#2
Gibbo Senior Member Join Date: Apr 2011 Location: North Wirral Posts: 1,165	Disconnect and resolder the wires. It's not dirt but a damaged contact or break in the wire. Share Share this post on Digg Del.icio.us Technorati Twitter Harlequin likes this. __________________ PP Service: Cheshire, Merseyside, NE Wales 307 SE

10-13-2011, 01:21 PM	#3
Harlequin Junior Member Join Date: Oct 2011 Posts: 10	awesome thank you - will be interesting since my soldering skills were last used about 20 years ago! guessing battery disconect ofc before playing with it? Share Share this post on Digg Del.icio.us Technorati Twitter

10-31-2011, 02:10 PM	#4
Harlequin Junior Member Join Date: Oct 2011 Posts: 10	help? airbag light is back on ,pulled the connector block apart and theres nothing soldered oO - also it terminates into a plastic connection under the seat - and 2 of the wires dont go into anything Uploaded with ImageShack.us heres a picture - the screwdriver is covering the wires which dont seem to actually go anywhere any help? Share Share this post on Digg Del.icio.us Technorati Twitter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement