Fault codes

sandybags · 12-01-2011, 11:04 AM

Hi everyone, looking for some advice re my 607 2.2 hdi auto.
Firstly dph system faulty came up on dash and it went into limp mode. I have a mate who is a mechanic who read the fault codes with a (solus ?) reader and it gave the following fault codes P0380, P0120, P0234.Could anyone please advise as to what the problem is and the best way to fix it.Don't want to start just replacing parts here there and everywhere. Would really appreciate the help of some of you knowledgable guys out there before I pull out anymore of my few remaining hairs. Thanks in advance.
Terry

sandybags · 12-05-2011, 01:22 PM

Further to my OP have now found out what the codes mean
P0380- pre-heating relay circuit
P0120-EGR Butterfly
P0234-Turbo pressure regulation.
Anyone point me in the right direction on this please.The car drives fine until the light comes on saying depollution system faulty then goes into limp mode.After doing a few miles and stopping and restarting the light goes out and it runs fine for 50-75 miles then it does it all over again.I'm ready for doing a Basil (Fawlty) on it ,any help would be very appreciated before I give it " a bloody good thrashing".
Thanks
Terry

12-01-2011, 11:04 AM	#1
sandybags Junior Member Join Date: Nov 2010 Posts: 6	Fault codes Hi everyone, looking for some advice re my 607 2.2 hdi auto. Firstly dph system faulty came up on dash and it went into limp mode. I have a mate who is a mechanic who read the fault codes with a (solus ?) reader and it gave the following fault codes P0380, P0120, P0234.Could anyone please advise as to what the problem is and the best way to fix it.Don't want to start just replacing parts here there and everywhere. Would really appreciate the help of some of you knowledgable guys out there before I pull out anymore of my few remaining hairs. Thanks in advance. Terry Share Share this post on Digg Del.icio.us Technorati Twitter

12-05-2011, 01:22 PM	#2
sandybags Junior Member Join Date: Nov 2010 Posts: 6	Further to my OP have now found out what the codes mean P0380- pre-heating relay circuit P0120-EGR Butterfly P0234-Turbo pressure regulation. Anyone point me in the right direction on this please.The car drives fine until the light comes on saying depollution system faulty then goes into limp mode.After doing a few miles and stopping and restarting the light goes out and it runs fine for 50-75 miles then it does it all over again.I'm ready for doing a Basil (Fawlty) on it ,any help would be very appreciated before I give it " a bloody good thrashing". Thanks Terry Share Share this post on Digg Del.icio.us Technorati Twitter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement