![]() |
| |
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 |
|
Junior Member
Join Date: Dec 2009
Posts: 6
|
HELP, just gone to my 2006 year 407 2ltr diesel to check fluids and there is oil in my coolant bottle, lots of it,when i took the cap off it just gushed out.the car runs great. just wondering if its something else other than the head gasket.there is no water in the oil. HELPPPP> cheers Vinny
__________________
Last edited by vinny1111; 12-17-2011 at 10:56 AM. Reason: mistake in title |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Senior Member
Join Date: Feb 2011
Location: PLYMOUTH,DEVON
Posts: 535
|
probably oil cooler or head gasket
__________________
407 1.6 HDI FAP 110 PP OWNER PLYMOUTH
|
|
|
|
|
|
#3 |
|
Senior Member
Join Date: Nov 2011
Posts: 128
|
The oil and water are two closed systems that run next to each other, and meet at the head gasket, so that would be my guess.
|
|
|
|
|
|
#4 |
|
Senior Member
Join Date: Aug 2011
Location: England
Posts: 139
|
Sounds like there might be a bit of pressure if it gushed out, does sound like head gasket.
Is the oil ok or is it milky inside the filler cap or on the dipstick ? I would advise you not driving it as you could cause some serious problems. But I had a Renault 19 TD I bought on a well known auction site for £100 with the same problem, I drove it 180 miles home and we put another 20000 miles on it and it even passed its MOT like it ![]() I never did the gasket and was still going strong when I sold it £450 |
|
|
|
|
|
#5 |
|
Senior Member
Join Date: Feb 2011
Location: PLYMOUTH,DEVON
Posts: 535
|
most of this problem is with oil cooler
__________________
407 1.6 HDI FAP 110 PP OWNER PLYMOUTH
|
|
|
|
|
|
#6 |
|
Junior Member
Join Date: Dec 2009
Posts: 6
|
Hi, the problem was the oil cooler.Its a common fault. this can be tested by bypassing the water hose to the oil cooler then running the car for a few days no harm will come to anything at all, you will then see the slight oil leak comming out of the oil cooler water pipe.this was recommended to me by a peugeot technician.
__________________
|
|
|
|
|
|
#7 |
|
Senior Member
Join Date: Dec 2011
Location: Lancashire.
Posts: 104
|
hiya mate,
how much did the repair cost, did you use a new oil cooler or old? any pics or info would be great for future. manythanks.
|
|
|
|
|
|
#8 | |
|
Junior Member
Join Date: Dec 2009
Posts: 6
|
Quote:
Hope this helps.
__________________
|
|
|
|
|
|
|
#9 |
|
Senior Member
Join Date: Dec 2011
Location: Lancashire.
Posts: 104
|
Good work pal, good to hear back from you.
regards |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|