|
|
 Home
:: Peugeot Forums
:: Rules
:: Articles
:: About
Us ::
Partner Vendors
:: Advertise
|
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
11-28-2011, 01:50 AM
|
#1 |
|
Senior Member
Join Date: Nov 2011
Location: Southend, Essex.
Posts: 117
|
Glow Plugs on 1.6HDI, changed all 4 today
I have changed them on my previous 406 2.0HDI, is it much the same on 1.6HDI just covered up a bit more and are they on front of rear of the head.
Last edited by bryan407sw; 12-03-2011 at 04:50 PM. Reason: now done |
|
|
| Sponsored Links | |||
Advertisement | |||
|
11-28-2011, 10:03 AM
|
#2 |
|
Senior Member
Join Date: Apr 2011
Location: North Wirral
Posts: 1,162
|
They're round the back.
__________________
PP Service: Cheshire, Merseyside, NE Wales 307 SE |
|
|
|
|
11-28-2011, 12:27 PM
|
#3 |
|
Senior Member
Join Date: Nov 2011
Location: Southend, Essex.
Posts: 117
|
That would be why I couldn't find them then, thanks!
What needs to be removed to change all, just air filter? Also beleive the EGR valve is there too under the fuel filter, is that correct as I want to wip it out to give it a clean. |
|
|
|
|
11-28-2011, 02:37 PM
|
#4 | |
|
Senior Member
Join Date: Apr 2011
Location: North Wirral
Posts: 1,162
|
Quote:
__________________
PP Service: Cheshire, Merseyside, NE Wales 307 SE |
|
|
|
|
|
11-28-2011, 04:36 PM
|
#5 |
|
Senior Member
Join Date: Feb 2011
Location: PLYMOUTH,DEVON
Posts: 535
|
good luck
__________________
407 1.6 HDI FAP 110 PP OWNER PLYMOUTH 
|
|
|
|
|
11-28-2011, 04:43 PM
|
#6 |
|
Senior Member
Join Date: Nov 2011
Location: Southend, Essex.
Posts: 117
|
bit of a bugger are they!
|
|
|
|
|
12-01-2011, 09:46 AM
|
#7 |
|
Senior Member
Join Date: Nov 2011
Location: Southend, Essex.
Posts: 117
|
Found a pic of the back of the engine, looks like the 2 furthest from the cam belt arnt too hard , second one a bit harder but the first one looks like its quite hard to get to.
Is there any thing else I need to remove other than the air box? I'm getting 4 new denso plugs for £40 from spares shop, is that the going price. |
|
|
|
|
12-01-2011, 10:05 AM
|
#8 |
|
Senior Member
Join Date: Sep 2010
Location: St Austell, Cornwall
Posts: 2,969
|
Dealer is £17+VAT each, and Eurocarparts about £13+VAT, so £40 for the lot isn't bad
__________________
407SW 2.0HDI 136 SE 2005 ex. 306 2.0HDI 90 (x2) |
|
|
|
|
12-01-2011, 10:06 PM
|
#9 |
|
Senior Member
Join Date: Nov 2011
Location: Southend, Essex.
Posts: 117
|
Ive seen them and other things for sale cheaper on ebay, but Im always wary of buying stuff that could be either seconds/out of tollerence or are cheap quality.
|
|
|
|
|
12-03-2011, 04:40 PM
|
#10 |
|
Senior Member
Join Date: Nov 2011
Location: Southend, Essex.
Posts: 117
|
got them done today, all four were dead!
Its a bit of a pain, but would be easyer to do again as I know how to do them now. Few tips You need a 1/4 drive long reach 10mm socket, and a normal 7mm. The 7mm is for the nuts that hold the wires, put gease in the socket to hold the nut in when you remove and replace them. Air box lower needs to have the plastic clip inside removed so you can split it and remove the 2 halfs. |
|
|
|
| Sponsored Links | |
Advertisement | |
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
