cooling blower problem 407 1.6 hdi

sterion75 · 11-19-2011, 05:38 PM

Hi,
as part of clearing depollution faults I need some info on cooling fan integrated into ecu, P0483 please. Autodata suggest its the engine cooling fan. Any ideas how to correct this fault would be welcome. I am guessing fuse, relay, or motor replacement. Does anybody know the fuse number and which out of the three fusebox's this would be in to get me started please, Jim

magma1974 · 11-19-2011, 05:42 PM

change this relay

sterion75 · 11-19-2011, 06:53 PM

many thanks for your reply, I will try that. Would you have any part numbers or location on the car(assuming it's the one attached to the radiator fan?)

magma1974 · 11-19-2011, 08:06 PM

near the fan

sterion75 · 11-21-2011, 05:32 PM

Hj Magma,
Many thanks for your help re the cooling fan relay. I have one ordered but cant get eyes on the faulty one. Is it inside the clipped shut box to the right of the fan as you stand in front of the car? If so is it normal to access it through the grill. The thought of taking the bumper off seems extreme.

magma1974 · 11-21-2011, 05:35 PM

bumper off is 15 minut but you can take off lower cooler cover

sterion75 · 11-21-2011, 05:43 PM

Thanks Magma,
Will get on it tmoz. Bumper cant be too involved then, thats encouraging. Will try the other route first before setting on the bodywork. Thanks again.

sterion75 · 11-23-2011, 07:24 PM

Replaced the relay next to the fan unit

This was part 6555VL however it didnt look like the one in your photo and hasnt solved the issue (no 5 in this diagram http://autopartmaster.com/imgbank/ca...36&unit=12C05A)

Is there another relay or any ideas which fuse to look at as well?

Thanks

magma1974 · 11-24-2011, 08:54 AM

it is the same. must check wiring

Gibbo · 11-24-2011, 09:17 AM

When my fan wasn't working it was the whole loom which needed replacing, as well as fan.

11-19-2011, 05:38 PM	#1
sterion75 Senior Member Join Date: Sep 2011 Location: Atherton, Boston Lincs, or Akbuk, Turkey Posts: 932	cooling blower problem 407 1.6 hdi Hi, as part of clearing depollution faults I need some info on cooling fan integrated into ecu, P0483 please. Autodata suggest its the engine cooling fan. Any ideas how to correct this fault would be welcome. I am guessing fuse, relay, or motor replacement. Does anybody know the fuse number and which out of the three fusebox's this would be in to get me started please, Jim Share Share this post on Digg Del.icio.us Technorati Twitter

11-19-2011, 05:42 PM	#2
magma1974 Senior Member Join Date: Feb 2011 Location: PLYMOUTH,DEVON Posts: 535	change this relay Attached Thumbnails Share Share this post on Digg Del.icio.us Technorati Twitter __________________ 407 1.6 HDI FAP 110 PP OWNER PLYMOUTH

11-19-2011, 06:53 PM	#3
sterion75 Senior Member Join Date: Sep 2011 Location: Atherton, Boston Lincs, or Akbuk, Turkey Posts: 932	fan relay many thanks for your reply, I will try that. Would you have any part numbers or location on the car(assuming it's the one attached to the radiator fan?) Share Share this post on Digg Del.icio.us Technorati Twitter

11-19-2011, 08:06 PM	#4
magma1974 Senior Member Join Date: Feb 2011 Location: PLYMOUTH,DEVON Posts: 535	near the fan Share Share this post on Digg Del.icio.us Technorati Twitter __________________ 407 1.6 HDI FAP 110 PP OWNER PLYMOUTH

11-21-2011, 05:32 PM	#5
sterion75 Senior Member Join Date: Sep 2011 Location: Atherton, Boston Lincs, or Akbuk, Turkey Posts: 932	Hj Magma, Many thanks for your help re the cooling fan relay. I have one ordered but cant get eyes on the faulty one. Is it inside the clipped shut box to the right of the fan as you stand in front of the car? If so is it normal to access it through the grill. The thought of taking the bumper off seems extreme. Share Share this post on Digg Del.icio.us Technorati Twitter

11-21-2011, 05:35 PM	#6
magma1974 Senior Member Join Date: Feb 2011 Location: PLYMOUTH,DEVON Posts: 535	bumper off is 15 minut but you can take off lower cooler cover Share Share this post on Digg Del.icio.us Technorati Twitter __________________ 407 1.6 HDI FAP 110 PP OWNER PLYMOUTH

11-21-2011, 05:43 PM	#7
sterion75 Senior Member Join Date: Sep 2011 Location: Atherton, Boston Lincs, or Akbuk, Turkey Posts: 932	Thanks Magma, Will get on it tmoz. Bumper cant be too involved then, thats encouraging. Will try the other route first before setting on the bodywork. Thanks again. Share Share this post on Digg Del.icio.us Technorati Twitter

11-23-2011, 07:24 PM	#8
sterion75 Senior Member Join Date: Sep 2011 Location: Atherton, Boston Lincs, or Akbuk, Turkey Posts: 932	Replaced the relay next to the fan unit This was part 6555VL however it didnt look like the one in your photo and hasnt solved the issue (no 5 in this diagram http://autopartmaster.com/imgbank/ca...36&unit=12C05A) Is there another relay or any ideas which fuse to look at as well? Thanks Share Share this post on Digg Del.icio.us Technorati Twitter Last edited by sterion75; 11-23-2011 at 07:27 PM.

11-24-2011, 08:54 AM	#9
magma1974 Senior Member Join Date: Feb 2011 Location: PLYMOUTH,DEVON Posts: 535	it is the same. must check wiring Share Share this post on Digg Del.icio.us Technorati Twitter __________________ 407 1.6 HDI FAP 110 PP OWNER PLYMOUTH

11-24-2011, 09:17 AM	#10
Gibbo Senior Member Join Date: Apr 2011 Location: North Wirral Posts: 1,162	When my fan wasn't working it was the whole loom which needed replacing, as well as fan. Share Share this post on Digg Del.icio.us Technorati Twitter __________________ PP Service: Cheshire, Merseyside, NE Wales 307 SE

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode