Unidentifiable plastic retaining screws

brynhils · 05-13-2010, 12:51 PM

I have a 308SW. Underneath each seat, attched to the floor, is a plastic bracket which has a cable going into the seat. The unit is identified on Peugeot 'ServiceBox' as the Connector Bracket 00006556PH.

Holding this bracket to the floor are two thin (threaded) plastic screws which go through into one of those 'speading' housings.

I am missing two of these. The local dealer has contacted Peugeot who failed to identify them and emailed him back suggesting the customer (me) try a hardware shop!

I have searched the PUG Servicebox to no avail. Has anyone here come across them before?

Thanks

brynhils · 05-13-2010, 04:16 PM

Well, seeing as I can't find the correct 'screw rivets' for the job and Peugeot have been as helpful as nothing I had a rummage in the garage.

I have now secured the units using some standard (brown) rawl-plugs some stainless steel screws and some washers.

A bit 'Heath-Robinson' but it'll do th-noo!

-B-

05-13-2010, 12:51 PM	#1
brynhils Junior Member Join Date: May 2010 Posts: 2	Unidentifiable plastic retaining screws I have a 308SW. Underneath each seat, attched to the floor, is a plastic bracket which has a cable going into the seat. The unit is identified on Peugeot 'ServiceBox' as the Connector Bracket 00006556PH. Holding this bracket to the floor are two thin (threaded) plastic screws which go through into one of those 'speading' housings. I am missing two of these. The local dealer has contacted Peugeot who failed to identify them and emailed him back suggesting the customer (me) try a hardware shop! I have searched the PUG Servicebox to no avail. Has anyone here come across them before? Thanks Share Share this post on Digg Del.icio.us Technorati Twitter Last edited by brynhils; 05-13-2010 at 01:03 PM.

05-13-2010, 04:16 PM	#2
brynhils Junior Member Join Date: May 2010 Posts: 2	Fixed? Well, seeing as I can't find the correct 'screw rivets' for the job and Peugeot have been as helpful as nothing I had a rummage in the garage. I have now secured the units using some standard (brown) rawl-plugs some stainless steel screws and some washers. A bit 'Heath-Robinson' but it'll do th-noo! -B- Share Share this post on Digg Del.icio.us Technorati Twitter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement