![]() |
| |
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 |
|
Junior Member
Join Date: Apr 2010
Posts: 15
|
Anyone else having trouble starting 308 when it's cold?
Needs some gas and a few attempts to get engined turned over. Peugeot say diagnostics report no problem so they replaced spark plugs - still an issue and all Peugeot keep saying is that nothing comes up in diagnostics. |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Senior Member
Join Date: Jan 2010
Location: Southern Ireland
Posts: 2,330
|
There is a software update for this problem. It stops the engine management ecu drenching the plugs with petrol.
__________________
Peugeot Master Tech/Citroen Tech |
|
|
|
|
|
#3 | |
|
Junior Member
Join Date: Apr 2010
Posts: 15
|
Quote:
Thanks for your response. Can you suggest what I say to the Pug dealership to get this update? The wife was only advised to replace the spark plugs as the diagnostics report no problem. Thanks |
|
|
|
|
|
|
#4 |
|
Junior Member
Join Date: Jun 2010
Location: South Shields
Posts: 22
|
This problem has been affecting mine too. Are the dealers aware of this problem and if so, I assume the software update is free?
__________________
Peugeot 207 1.4 VTi SE & Peugeot 308 1.6 VTi Sport |
|
|
|
|
|
#5 |
|
Junior Member
Join Date: Apr 2010
Posts: 15
|
My local dealer wasn't aware of the problem as didn't mention the software upgrade.
I've looked online and this looks like quite a common problem. |
|
|
|
|
|
#6 |
|
Junior Member
Join Date: Apr 2010
Posts: 15
|
|
|
|
|
|
|
#7 | |
|
Junior Member
Join Date: Mar 2011
Posts: 1
|
Quote:
|
|
|
|
|
|
|
#8 | |
|
Junior Member
Join Date: May 2010
Posts: 15
|
Quote:
Regards Onelly27 |
|
|
|
|
|
|
#9 |
|
Junior Member
Join Date: Apr 2011
Posts: 21
|
I've just bought an '08 308 1.6 vti S, still with 3 months Peugeot Warranty, and this sounds very similar to my problem. Usually taking 2 or three times to get it started.
Car will turnover and start, then engine dies. Turning the key again, engine will start with revs around 900rpm, die almost stall, then with a brrmmmp revs will pick up to just over 1000 rpm. Also, when driving with a cold engine, it feels 'chuggy', almost like a misfire, but not as obvious. Anyone had a software update that remedied this, or are we looking for something else? |
|
|
|
|
|
#10 |
|
Junior Member
Join Date: Apr 2011
Posts: 21
|
Off to pick up my car...engine management system reset, and latest firmware uploaded.
Will it now start from cold? I have my doubts, but let's see. |
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|