![]() |
| |
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 |
|
Junior Member
Join Date: Jan 2012
Posts: 1
|
Hi All
![]() I was driving today & when I tried shift into reverse, the gearstick went extremely loose & it took me 5 minutes to engage reverse ![]() Now I cannot get reverse or 5th...1 though 4 seem okay but the lever is VERY loose even when in gear. I've lifted the gear stick gaiter off the centre console & both selector cables look to be connected okay...Problem is I dont know where to look under the bonnet. If anyone could please advise me where to look (and if anything needs to be removed for access) or if this is a job that needs to be done from underneath I would be incredibly grateful ![]() My car is a 51 plate 1.6 16v 3 door 307 Many thanks, CUS. |
|
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
Moderator
Join Date: Mar 2009
Location: Cheshire
Posts: 1,220
|
Put the gearstick into the 5th position then disengage it whilst pulling the gear lever to the left
I've found if i try and disengage 5th whilst the lever is being pushed to the right it goes into a kind of limbo where it feels disconnected! Basically just make sure you arent putting any excessive right hand force on the lever when selecting 5th/reverse, see if that helps
__________________
![]() ![]()
|
|
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|