Engine Mounts

jodyburton · 01-13-2012, 09:01 AM

My local mechanic said I could do with new engine mounts to tighten up the running of my engine. There is lots of engine shake and over run when the ignition is turned off. He mentioned that these were quite expensive to purchase from Peugout.

How many engine mounts does the 307 have and how do I know which one needs to be replaced or which one causes the most engine shake?

Thanks

Jody.

dpmiller · 01-13-2012, 10:55 AM

three, one at each side and one at the bottom. Probably the bottom one that's softened, especially if you've had any oil, fuel, or CV joint grease leak over it.

01-13-2012, 09:01 AM	#1
jodyburton Junior Member Join Date: Jul 2008 Posts: 26	Engine Mounts My local mechanic said I could do with new engine mounts to tighten up the running of my engine. There is lots of engine shake and over run when the ignition is turned off. He mentioned that these were quite expensive to purchase from Peugout. How many engine mounts does the 307 have and how do I know which one needs to be replaced or which one causes the most engine shake? Thanks Jody. Share Share this post on Digg Del.icio.us Technorati Twitter

01-13-2012, 10:55 AM	#2
dpmiller Senior Member Join Date: Jun 2011 Location: Newtownards, NI Posts: 136	three, one at each side and one at the bottom. Probably the bottom one that's softened, especially if you've had any oil, fuel, or CV joint grease leak over it. Share Share this post on Digg Del.icio.us Technorati Twitter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement