The bonnet on my 55 reg 307 S HDi 1.6 90 hatch is a little lower than the front panel and when trying to open you cannot move the catch as it pulls the bonnet down and there isn't enough room for your fingers. I can open it using a screwdriver but it would be nice to get the bonnet alignment correct so I can open the bonnet without using the screwdriver.
I've had a quick look and it looks as if the catch cannot be lifted as it appears to be fully raised up to some stops and the loop on the bonnet doesn't appear to be adjustable.
I would expect there to be some adjustment somewhere to make panel alignment possible. I would appreciate someone letting me know how to adjust this if it is possible.
Thanks in advance.
I've had a quick look and it looks as if the catch cannot be lifted as it appears to be fully raised up to some stops and the loop on the bonnet doesn't appear to be adjustable.
I would expect there to be some adjustment somewhere to make panel alignment possible. I would appreciate someone letting me know how to adjust this if it is possible.
Thanks in advance.