206 sw boot/window

Whiteek4 · 10-02-2011, 08:29 PM

hi all. new member with a little help needed. i have looked about and cant find any information about it, well here goes..............
i have just bought a 206 sw quicksilver, it has the rear opening window within the boot lid, the boot lid opens fine but the window part doesnt, i have swapped the switches over and boot catches and they all work, so it just seems like there isnt any power to it. i have looked for a fuse but cant seem to find any info about this. any help would be great, thanks in advance

davidireland · 10-02-2011, 08:38 PM

Threre could be a broken wire in the conduit running into the car from the door. Check wiring. There should be 12v at one of the wires to the switch. All its doing when you operate the switch is close the circuit.

Whiteek4 · 10-02-2011, 08:43 PM

ok thanks, i'll have a look. i have check for voltage theys why i was looking for a blowen fuse/relay etc. is there any thing like this for them? thanks

davidireland · 10-02-2011, 08:45 PM

Not seperate. It'll be part of the central locking system.

Whiteek4 · 10-02-2011, 08:50 PM

ok thats great thanks. i'll check for any broken wires in the flexi pipe part.

Whiteek4 · 10-04-2011, 06:15 PM

Hi again. Well i have check the flexi pipe part and all wires are fine down through there and to where there is a block below the rear light. Any one got any more ideas would be a great help!

10-02-2011, 08:29 PM	#1
Whiteek4 Junior Member Join Date: Oct 2011 Posts: 7	206 sw boot/window hi all. new member with a little help needed. i have looked about and cant find any information about it, well here goes.............. i have just bought a 206 sw quicksilver, it has the rear opening window within the boot lid, the boot lid opens fine but the window part doesnt, i have swapped the switches over and boot catches and they all work, so it just seems like there isnt any power to it. i have looked for a fuse but cant seem to find any info about this. any help would be great, thanks in advance Share Share this post on Digg Del.icio.us Technorati Twitter

10-02-2011, 08:38 PM	#2
davidireland Senior Member Join Date: Jan 2010 Location: Southern Ireland Posts: 2,327	Threre could be a broken wire in the conduit running into the car from the door. Check wiring. There should be 12v at one of the wires to the switch. All its doing when you operate the switch is close the circuit. Share Share this post on Digg Del.icio.us Technorati Twitter __________________ Peugeot Master Tech/Citroen Tech

10-02-2011, 08:43 PM	#3
Whiteek4 Junior Member Join Date: Oct 2011 Posts: 7	ok thanks, i'll have a look. i have check for voltage theys why i was looking for a blowen fuse/relay etc. is there any thing like this for them? thanks Share Share this post on Digg Del.icio.us Technorati Twitter

10-02-2011, 08:45 PM	#4
davidireland Senior Member Join Date: Jan 2010 Location: Southern Ireland Posts: 2,327	Not seperate. It'll be part of the central locking system. Share Share this post on Digg Del.icio.us Technorati Twitter __________________ Peugeot Master Tech/Citroen Tech

10-02-2011, 08:50 PM	#5
Whiteek4 Junior Member Join Date: Oct 2011 Posts: 7	ok thats great thanks. i'll check for any broken wires in the flexi pipe part. Share Share this post on Digg Del.icio.us Technorati Twitter davidireland likes this.

10-04-2011, 06:15 PM	#6
Whiteek4 Junior Member Join Date: Oct 2011 Posts: 7	Hi again. Well i have check the flexi pipe part and all wires are fine down through there and to where there is a block below the rear light. Any one got any more ideas would be a great help! Share Share this post on Digg Del.icio.us Technorati Twitter

Remove Advertisements Sponsored Links
PeugeotForums.com Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode